What Have You Done To Your 2nd Gen Tacoma Today?

Yes I did sorry

 

Out camping. Gettinger dirty before detail next week.

 

Added door projector lights. I didn't like the idea of taking the door apart and drilling, so I went with the wireless option. 3m tape on the door magnet and projector. I also used the Velcro 3m tape so I can remove and put them back on anytime.

Pretty easy 5 minute job for $12

 

I was just looking at those - curious to see what you think of them vs. the OEM ones.

 

went out to move truck and a bird had pooped on it so i had to wash it

 

I would've done the same.

 

Finally got around to mounting my ARB compressor with a homemade template cut out from the cardboard box it came in lol

 

I'm starting the ghetto plasti dip... using the hood as a test area to see how bad I am at this.
Things I have learned so far:
12 cans isn't enough
Black is hard to cover
Having a bad paint job makes it harder
Arizona is hot
Getting dirt stuck in the 3rd coat is irritating

Picture is after the 3rd whole can was used on just the hood.

More to come

 

Drove down to check on the house. Looks like I have some walls up. Ready for that 3-car garage.

 

Took her to a place named little glamis

 

Just installed my set today. Pretty happy with the fit, the plastic buckles are ok, can't seem to figure out how keep the excess ties tight in the buckle tie.

The material is A++ . Perfect for my needs.

 

Finally got around to putting in my warm m8000. Overall pretty stoaked on the outcome.

 

I'm not personally a huge fan of the sound but I'm most likely going to replace the muffler.it's definitely louder than factory but not overwhelming. Only reason I don't don't like it is that it sounds really bubbly inside.

 

Washed and waxed, also detailed the interior. Course the wife gave me the "you never do that to my ride" so I washed and waxed her Sante Fe. My arms are sore but it's done at least for awhile.

 

not really tacoma related but i did drive it to walmart and picked up 2 of the ozark trail hopper coolers for 60 bucks. One for the pops and one for my self. same capacity compared to the yeti 40l hopper.

 

Yeah, I used 1 can per wheel to get a nice solid coat back when and I've never seen anyone get an even coat from rattle cans. You need the gun others mentioned. If you haven't already, check out Fonzies videos on the plastidip YouTube channel. Good luck and keep us posted.

 

Nice! What's the layout like for the house?

 

She doesn't look dirty

 

looks like your doing a good job. i've never tried such a large area before. on your last couple of coats hold back from the surface and seee if it'll even out some. when it completely dries hopefully it'll even out some more also. good luck and keep us posted