1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

SOLD!! 3" Leaf springs - All-Pro Offroad

Discussion in '3rd Gen Tacoma Parts Marketplace (2016-2023)' started by seelyartacus, Jun 17, 2016.

  1. Jun 17, 2016 at 1:26 PM
    #1
    seelyartacus

    seelyartacus [OP] Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83033
    Messages:
    357
    Gender:
    Male
    San Diego
    Vehicle:
    '16 TRD Sport 4x4, grey, tech&tow pkg
    FNWheels six shooter matte bronze, Falken WildPeak M/T 295/70/r17, All-Pro Expedition leafs, Fox Factory 2.5 w/ res (front/rear), Icon billet UCA w/ sphericals, custom sliders, 4.56 re-gear, RCI bed rack , Tepui RTT, Prinsu Designs Cabrac, CBI T3 alum front bumper, CBI T3 rear bumper with dual swing away and tire carrier, 20in light bar, Warn VR10s winch, Factor 55 fairlead, flatlink, and hitch recovery point, All-pro alum skid, Rotopax, CMC, Timbren bump stops, rear Rigid Duallys, Rigid Dually ditch lights, ARB awning with LED lights, Currie F9 rear axle housing w/ Strange Engineering 3rd memb and ARB air locker., rear diff beather relocation, ARB compressor under hood, Bussman panel, 3d printed switch panel,OVTune ECU
    I had to upgrade to the expedition springs so I have 3" All-Pro Offroad Standard Springs with only ~2k miles on them. Asking $300 plus any shipping. For approx. the shipping from Montana to San Diego was $100. I also have the u-bolt flip plates that i'll throw in, you'll have to provide the actual u-bolts. Check out the details here...
     
  2. Jun 17, 2016 at 1:29 PM
    #2
    seelyartacus

    seelyartacus [OP] Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83033
    Messages:
    357
    Gender:
    Male
    San Diego
    Vehicle:
    '16 TRD Sport 4x4, grey, tech&tow pkg
    FNWheels six shooter matte bronze, Falken WildPeak M/T 295/70/r17, All-Pro Expedition leafs, Fox Factory 2.5 w/ res (front/rear), Icon billet UCA w/ sphericals, custom sliders, 4.56 re-gear, RCI bed rack , Tepui RTT, Prinsu Designs Cabrac, CBI T3 alum front bumper, CBI T3 rear bumper with dual swing away and tire carrier, 20in light bar, Warn VR10s winch, Factor 55 fairlead, flatlink, and hitch recovery point, All-pro alum skid, Rotopax, CMC, Timbren bump stops, rear Rigid Duallys, Rigid Dually ditch lights, ARB awning with LED lights, Currie F9 rear axle housing w/ Strange Engineering 3rd memb and ARB air locker., rear diff beather relocation, ARB compressor under hood, Bussman panel, 3d printed switch panel,OVTune ECU
    These are 11-leaf progressive springs
     
  3. Jun 17, 2016 at 1:31 PM
    #3
    NV_Tacoma

    NV_Tacoma Well-Known Member

    Joined:
    Oct 21, 2015
    Member:
    #167302
    Messages:
    1,418
    Gender:
    Male
    First Name:
    Paul
    Northern Nevada
    Vehicle:
    2013 MGM ACLB TX Off Road
    2016 White DCSB TRD Off Road (Sold)
    Just sent you a PM
     
  4. Jun 17, 2016 at 1:36 PM
    #4
    yaapp

    yaapp Well-Known Member

    Joined:
    Feb 11, 2014
    Member:
    #122880
    Messages:
    463
    Gender:
    Male
    Bay Area, CA
    URD CAI front: Fox 2.5 w/ reservoir 700lbs coil Camburg UniBall Rear: 2.5 w/ reservoir
    I have also sent a PM
     
  5. Jun 20, 2016 at 11:31 AM
    #5
    seelyartacus

    seelyartacus [OP] Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83033
    Messages:
    357
    Gender:
    Male
    San Diego
    Vehicle:
    '16 TRD Sport 4x4, grey, tech&tow pkg
    FNWheels six shooter matte bronze, Falken WildPeak M/T 295/70/r17, All-Pro Expedition leafs, Fox Factory 2.5 w/ res (front/rear), Icon billet UCA w/ sphericals, custom sliders, 4.56 re-gear, RCI bed rack , Tepui RTT, Prinsu Designs Cabrac, CBI T3 alum front bumper, CBI T3 rear bumper with dual swing away and tire carrier, 20in light bar, Warn VR10s winch, Factor 55 fairlead, flatlink, and hitch recovery point, All-pro alum skid, Rotopax, CMC, Timbren bump stops, rear Rigid Duallys, Rigid Dually ditch lights, ARB awning with LED lights, Currie F9 rear axle housing w/ Strange Engineering 3rd memb and ARB air locker., rear diff beather relocation, ARB compressor under hood, Bussman panel, 3d printed switch panel,OVTune ECU

Products Discussed in

To Top