FJ fog light switch install

I purchased a FJ fog light switch without any soldering how would I wire its 6 pin harness to our 4 pin? Any help.....

 

On the FJ switch 2 extra pins are just to illuminate the indicator. Hope this helps.

 

Get the switch connector and pigtails from dealership. I did this for a Tacoma oem switch wired to an aftermarket harness. It may add $20 more to the project but IMO it was worth not having spend time and gas running around to search junkyards, electrical supply stores or online. Then splice switch into harness at appropriate points.

 

Does anyone know what wires from the OEM go where in the FJ harness?

 

Never seen an FJ equipped with 6 pin harness from the factory.
If you want actual FJ switch harness its part number
PT297-35070-LH

 

Got the switch on eBay and it came with the 6 pin harness

 

So I looked at my fog switch and it is only a five pin and they only used four. Black red re/green yellow/green does anyone know what comes out of our truck to the four pin?

 

This is the one I got off eBay it's an FJ switch....