How to shut off Main. Needed light after oil change?

Followed the instructions from manual & watched the YouTube videos but light still won't reset. How is this done?

 

Early 2011 Tacoma with the red gauge face you use the Odometer to reset.
IF you have a late year 2011 Tacoma with the white gauge face you follow the same procedure, but you have to use the Trip 1 instead of the Odometer.

Turn on ignition, (do not start the engine).
Set the Odometer to Trip 1.
Turn off ignition.
Press and hold the Trip reset button.
Turn on the ignition ( do not start the engine ).
You should see _ _ _ _ _ and it will count down these and then return to the trip reading, release the reset button.

At this point the Maintenance Light has been reset.

 

That did the trick! Thanks so much!

 

Everyone likes to start the morning with a happy ending!

 

So it should not reset the Trip? just the light?

 

If you do it right, correct.

 

Yes, just the Maintenance light.

 

Worked like a charm! Thanks for the rundown.

 

yup

set trip 1 [or A]

turn off vehicle

hold down trip button, turn key to on, keep holding button hold till countdown blinks stop