285/75/16 question

Okay so while I'm waiting for my '16 dc trd or 4x4 been doing a shit ton of researching everything from suspension to armor. I plan on running ome 886 coils up front for a Demello bumper and winch, with 285/75/16's on scs ray10's. I can't do everything at once, so I was wondering if I installed the wheels and tires with just 1/2" top spacers would that work until I saved enough to complete the front? I believe the ray10's are 16x8 4"bs -12offset.

 

You "might" be good with the -12 offset - that's going to stick out a bit from the fender - pretty aggressive look and may even solve the rub issue. I have a -6 offset and the tire shoulder is just even or a hair wider than the fender flairs. I'd try the wheels tire combo and see what's what ... then add a top spacer if you need to. You tire might rub on a full lock turn....

 

Thanks for the input! You're right, I need to just throw them on and go from there. I don't mind trimming and cutting, I just want to be able to drive it around til I can buy the rest of the setup.

 

Bump for some more input