What Have You Done To Your 3rd Gen Today?

Got my BC Toyota 4wd group decal so stuck that on tonight, now I'm properly supported in getting more BC pinstripes

 

Don't come to California, too liberal and they want to take away our ar-15 and ak47

 

I tried dry but came out very bubblely. It came off good(the 4 much better than the rest). The transfer paper was really thick which made me feel like I nailed it only to see bubbles. May try soapy next try.

I really like the color on my super white.

 

P or LT tires?

 

Shit, that squeaked worse then my bed on prom night.

 

I would actually say stay away from the soapy water on this type of decal. Those little pieces will slide all over the place and you'll never get it all straight. If you don't already get a good felt squeegee and don't be afraid to press hard on the transfer paper. I like starting in the middle and working my way outward. Some bubbles are inevitable no matter your skill. I use a 29ga syringe and heat gun to extract air bubbles as well as make small holes for squeegeeing. You also don't need to get everything perfect. The sun will take out small imperfections in a couple of weeks. If you have any issues with it sticking to the backing paper you can microwave them. 3 seconds at a time only!
I'll help if you come out to Phoenix

 

Thanks. Should it be on the bill if they did it? Cause all I see on the bill is oil change and that they checked fluids.

 

awesome truck! May I ask what type of sliders those are?!

 

those are not sliders. I believe those are the predator tubes steps

 

Signed the papers on a new MGM DCSB OR today, should be here in a few days

 

they're the predator tube steps from toyota.

 

So I treated the little bugger to a alignment after work and then brought him home and gave him a detail inside and out. Had the alignment set the camber and toe at 0° and the caster 3°. These numbers are with 887s and light racing upper control arms!

 

best truck ever washed her this weekend gona install another weatherguard tool box tomarrow

 

Anyone powder coated the stock 3rd gen wheels?

 

B

Any idea why the set the caster half a degree farther forward on the RF?

 

This weekend but installed my Ironman Suspension Foam Cell full kit. +2" Front and +1 5/8" Rear.

 

AWESOME! You'll have to let us know how you like it. Those foam cell shocks sound very interesting!

 

so far only a couple hundred KMs of all on road. It's a bit firmer than the stock TRD Sport. I noticed it right away but so far both city and highway feels much for 'planted'. I started a build thread where I will try to stay up on how well the lift performs as I put it through it's paces.

 

On the map screen in your main display, there is a little compass symbol type button in the upper left. That swaps between always north / alignment towards vehicle, and also changes how it displays in the heads up.

 

Was wondering the same thing, have used carista to turn off pretty much all warning tones. I haven't found a way to bypass that though and I actually think it's hard wired, not computer controlled.

Just curious, what were the big things you used carista to change?