What Have You Done To Your 3rd Gen Today?

Their very dirty Black Rhino El Cajons

 

Best Truck alarm too!

 

I got mine off ebay. Two sets for $165. Here's the link

(They are $99 a set on Amazon)

 

I dropped the boat back in the water yesterday (I wet slip it at my house, but had it out of the water for maintenance). Of course the Tacoma tows that little 17 footer easily.



Then today I installed my new Yakima JetStream, they still need a little tweaking, but are pretty solid and quiet. I got the 60inch bars instead of the recommended 50inch bars, I had 58inch Thule bars on my old 4Runner and now on my Fiancee's Rav4, I didn't want to go narrower, and I think the 60inch looks right to me.

For some reason Yakima listed different measurements and settings for the 2016 Tacoma vs the

$73 2005-2015 Toyota Tacoma With 4L Right Petrol intake air snorkel kit high performance system compatible kit Replacement black Rotational Molding (2005-2015)

2005-2015, advice for anyone else installing- use the 2005-2015 settings, not sure what they were thinking, the roof on both models is the same, the 2016 fit wasn't as nice as the older 2015 specs.

 

Solved the problem of Toyota not allowing us Automatic trans owners to purchase JUST this switch plate. You tell me I have to but the whole upper console and I said hell nah.

 

Thanks

 

3D printed? Looks great! must be prototype in white, any plans to sell these (in black of course)?

 

Did the Icon stage 4, but no rear leafs installed yet. Front went up 1", and went with the BFG AT's 275/70/17, and yes they rub when turning and hitting bumps.....

 

Very nice.

Care to share a part file?

I'd be interested to see if we can replace the plate just to the left of it also and fit 4 or 5 switches there.

 

10-4, will do!!

 

My qi capable retrofit thing cost me 6 dollars shipped. Just a sticker like thing goes on your battery and has a couple contact points. Dont understand it but it works great on my note3

 

I had black leather seats installed. Professional install with Automotive Expressions of Hallsville Missouri (super job by Keith Hawkins). He uses both Katzskin and Roadwire company made OEM fitting kits (mine was Roadwire). Very happy with results!






factory cloth seats will now be for sale (TRD black with orange stitching).

 

Thanks are they hard to install!

 

That lift is setup for 2.5" from Icon....you sure you're getting as much height out of those as you're supposed to? Did you measure from hub to fender vs. ground to fender?

 

Getting ready to slap on some tires...

 

Probably the easiest thing you will ever do. Everything is reachable from under the hood. Twist the old bulbs out of the housing, unplug from the wiring harness, plug the new ones in, and twist the new LEDs into the housing. Took about 5 minutes!

 

@CaliRaisedLed

 

Nice, I have a 2wd TRD OR but my rear bumper is chrome?

 

Looks great!

I'll echo what others have said, are you going to make these available and for us non moonroof types what about a singe switch plate for that area as well?

 

Well, you need the kit I guess. The kit has the LEDs and module. The LEDs connects to the module, and that connects to the OEM harness