What Have You Done To Your 3rd Gen Today?

I used 5/8" diameter Heater hose to extend my AC drain guys! Here are some pics I posted a while back.

Had a idea a few weeks ago and finally got around to it! Relocated my air conditioning condenser drain! On my 2016 SR!

I was thinking how I've seen so many rusty frames in thst spot cause Toyota designed the drain to dump right out onto the Frame, so was thinking of adding a hose to it and run it down straight to the ground! Bought a 2 foot piece of 5/8" ID heater hose and it fits the small tube coming out of the firewall perfect! Attached a little hose clamp and didn't tighten it to much so you don't pinch shut the hose. Just thought I'd share with you guys! Only cost a few bucks and I'm sure it will pay for itself in the long run!

It works perfectly!!!!

How it looks from the factory :


After I added the extension:

 

I thought someone posted a 25% off code earlier

 

That ended June 20th, unfortunately. And it was only for the 2005 - 2015 2nd Gen.

 

Oh ok .. too bad

 

i was on the fence as there was only two people on the forums that i knew had them installed already... i ended up getting them and love the quality and the looks! just get ready to cut them up and trim if your running 285's... i cried every cut lol

 

Looks like the wheel well cut-out is in the wrong place to work with the short bed.

 

I took mine in a couple of weeks ago. Shop foreman said he'd have to replace the bumper, due to warping from the extreme heat. Said he'd need it all day to calibrate it. Still waiting to take it in

 

Ya we hook it up. And no that is a 6 door Dodge on 10 ton military axles!

 

Went shooting and put in a couple more orange interior pieces yesterday. The sun was really bright, so it doesn't represent the orange very well.

 

like your nerf bars...what brand are they?

 

what brand are they?

 

are those running boards or tubesteps? I cant decide which one I want to buy.

 

Cool, I found the pics, bad ass truck bro!

Do you have a picture of the before and after, head on looking at the front to show the sides!

Do you have any pictures where you had to cut on the bushwhackers

 

Where did you get a front rail?

 

Honestly, if you go to the dealer with aftermarket wheels and claim that the sensors were broken before you put the new wheels on, do you really expect the dealer to believe you?

I would just bite the bullet and buy new sensors.

 

I got mine here and they are the cheapest price .. i installed it in less than 10-minutes

http://stores.revolutionparts.com/discountpartsmonster.com/oe-toyota/pt27835100bh

 

Can anybody tell me which led interior lights to go with? I started to go with the $19.95 kit on Amazon but cancelled the order because I kept reading some of the bulbs burnt out in aweek or two.

 

I have the kit from Amazon and have had zero problems, they have worked perfect

 

Thanks, I guess for $20.00 what do I really have to lose! I like reading these forums to get different opinons, on what works and what doesn't

 

I've had mine for over 2 months now with no problems.