fog light wiring on 2106 SR

this question goes out to the truly talented electronic wiring minded guys on here(no offence to the rest of us). I have an SR dcsb, so it didn't come with fog lights, but thanks to @TacoJoy418, I now have a set of factory fogs. so since I don't have a factory wiring harness I wanted to ask if I could splice into my low beam wires to power the fogs, so that when I turn on headlights, the fogs would come on and would go off when I use high beams just like the factory versions. in other words no switch install in the cab. my "switch" would be the blinker/headlight stalk. I assume the headlights run off a relay and I didnt want to overload said relay, (or would it?),so could I put a relay inline on the fogs to prevent overload. wanting to install OPT7 fluxbeam LEDs in lows and fogs, if this helps to configure amp draw. I hope this makes since to anyone reading. any insight and or wiring diagrams would be greatly appreciated.

 

Keep it separate (power source for lamps)

 

Thanks for your input. It is greatly appreciated

 

This be a simple one...

 

Caribe, you have been a great help. When I get back home tomorrow, I will get started deciphering all the info. Will let you know how it turns out. Thanks again brother.

 

more viewing/reading stuff