What Have You Done To Your 2nd Gen Tacoma Today?

just minor issues. you may have a clip or so on the inner fender well for the bumper cover not noted in their instructions. Trim your grill piece for the gusset plates as well that support the attachment points, not just the protruding recovery points. I only got 4 bolts sent with the pack, so I picked up two more since the piece is held on with three each side (M10 x 30mm if I remember). For removing the little trim pieces below your light the instructions say to "pull straight out". What you need to do is release the two inner clip pins and then pull the trim piece towards the center of the vehicle in a line parallel with the face of the head light assembly. Other than that pretty straight forward and simple.

 

I was about to ask why we can't like our own posts but I realized if we could, Chadspride would like his own likes, like a mirror reflected into itself, into the infinite, and the universe would implode into nothing like that house in poltergeist

 

@ChadsPride

 

I managed to drive 330+ miles between fill ups, and my low fuel light never came on.

[ChadsPride will like this]

 

That would be like 'googling' Google and crossing the streams in Ghostbusters.

 

@ChadsPride

 

Had my truck at the dealership for a week now and still haven't heard anything about my frame.

 

I have her a bath

And my TacomaBeast sticker came in so I put that on

 

You might want to do some reading here https://www.tacomaworld.com/forums/tonneau-covers-caps-and-shells.198/, lots of great information there.

 

New Grill, Bull bar, and Blacked out badges. Trucks really starting to come together.

 

I put led bulbs in my taco today

 

Finally picked up my Craigslist steal of the day. This money was set aside for tires but I couldn't pass up a color matching shell.

I need to install a headliner to make it prett on the inside. Is it worth installing some heat shield onto the fiberglass first?

 

What is everyone's opinion. I just ordered bilstein 5100's. I have the option of getting OME 885, eibach 3", or pro comp 3". What would everyone recommend for ride and height both considered?

 

Thanks @o0oSHADOWo0o

 

Replaced my stock 710 battery that was on its way out with a new 840 one. No biggie.

EDIT: Now I'm debating if I save up for the big 3 upgrade with either a 200 or 250 alternator... Thoughts? Already saw the thread from @BamaToy1997

 

From Jumper?

 

Put some amber covers on my Dually D2 pods. Had clear ones on from when I installed them. I like the change. Subtle, but different

 

Finally got my SOS high clearance bumper installed. Pay no mind to the hanging trailer plug, it was attached after.