1st Gen 5 lug wheel size check

I have a 2001 2WD Tacoma SR5.

Looking to upgrade the steel wheels.

Currently stock:
...Wheels: 15x6
...Tires: P205x75R15

Looking into buying these:
XD Series XD122 Enduro 15x7 5x114.3 -6mm

Not looking to upgrade tires at the moment.

These new wheels are an inch wider, and have a -6mm offset vs the +40mm stock offset, so they will sit out further.

Trying to determine if they'll work without...
a) sticking out too much,
b) causing too much negative impact on the drive, and
c) without rubbing.

Contacted the seller, and they said this:

"Looks like they should bolt up to the truck the only concern is these are going to sit about 2” further out than the stock wheels. The concern with that is going to be the turning and rubbing. If you wanted to try them certainly can but we are unable to do returns or exchanges once a tire has been mounted on a wheel."​

I plugged the specs into wheel-size.com/calc (stock wheel left, new wheel right)...


Assuming I've plugged everything in correctly and the graphic is accurate, it doesn't look too bad. Just sticks out a little bit.

Looking for those with more experience to double check my work and offer their opinion.

Also, aside from sticking out too far, and rubbing, should I be concerned about the change to a positive scrub radius?