1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Removing OEM tonneau cover...

Discussion in '3rd Gen. Tacomas (2016-2023)' started by BenNV, Jul 16, 2016.

  1. Jul 16, 2016 at 10:44 AM
    #1
    BenNV

    BenNV [OP] Member

    Joined:
    Jul 11, 2010
    Member:
    #40041
    Messages:
    11
    Gender:
    Male
    Has anyone removed the factory tonneau cover, is it hard? Thanks
     
  2. Jul 16, 2016 at 10:47 AM
    #2
    Modesto Tacoma

    Modesto Tacoma Well-Known Member

    Joined:
    Mar 2, 2015
    Member:
    #149947
    Messages:
    733
    Gender:
    Male
    central california
    Vehicle:
    LIMITED 4X4
    It's easy. Just fold it all the way back and You will need a 12mm socket and ratchet to remove the bolt on the passenger side. Then remove it.
     
    Last edited: Jul 16, 2016
  3. Jul 16, 2016 at 12:08 PM
    #3
    bblake00

    bblake00 Well-Known Member

    Joined:
    May 29, 2008
    Member:
    #6965
    Messages:
    379
    Gender:
    Male
    AA County, MD
    Vehicle:
    2016 Poverty Model (SR) DCSB V6 4x4
    ^^^ But be careful, if you scratch the bolt it voids the warranty and your horse power drops by 100.

    Super easy, but it helps to have a second person move it but it can be done solo.
     
    DeadEyeWI likes this.

Products Discussed in

To Top