Upgrading to new T/O bearing by URD

Hey guys so im getting the dreaded t/o bearing chirp and im looking to replace it with the new hydraulic one that urd makes but i need to get this all done in one weekend so i can drive to work on monday does anyone remember or have a link to a writeup on removal of the 6sp trans on a 4wd i dont wanna leave this to chance thanx for any help in advance

 

Which TOB? This is the absolute best TOB upgrade...

http://urdusa.com/store/p1260519431/URD-FIX-U-Hydro-Bearing-Conversion-Kit-"The-FIX"/product_info.html

Despite the steeper price. As it completely removes the side loading. Which despite the better upgrade over stock, with the other TOB, the side loading remains, and has been reported many times of the return of the TOB squeak.

This is still a much better choice than the factory setup.

http://urdusa.com/store/advanced_se...Csid=9407191e615f7d0f3e28c155c2622c1b&search=

 

Ya im getting the 500 dollar one

 

Good choice!

 

Interesting...How many people actually went the extra mile and did the hydro bearing conversion? Who has significant mileage on theirs? Curious what people are making of that setup.

 

Post #9 is one person.

http://www.xr-underground.com/forum/showthread.php?t=57844

 

Has anyone had any experience or know of a writeup to take out the 6sp with 4wd so im not going into it blind i wanna make sure i get it done b4 work monday

 

Not sure on how to drop the trans but i do know that its recommended to replace your clutch while you're at it since youll have the trans out anyway, will save you from having to drop it again to do the clutch later on.

I have the dreaded TO bearing chirp as well for the last couple of months, trying to hold out for awhile so i can justify doing the clutch at the same time.