2006 illumination wire? (switch related)

Hey all!
Trying to wire up an Otrattw switch today and having a hard time deciphering which wire I should hook it up to for when the dash/dim lights are on. I have searched around for a wiring diagram and I cannot find one anywhere.

Does anyone have a wiring diagram for this? I also am not the greatest with wiring, so I am not sure exactly how to figure out which wire is the dash lighting. How do I figure this out manually, because that is more fun than looking at a diagram!

Thanks in advance!

 

I got power from my traction control switch. As you can see in the image above you tap into the green for + and green and white for ground. In reality you can use any switch that lights up with your dash. I just chose to use the tration control

 

and it should light up

 

@Yotamac might know..

 

Sadly, I don't have a traction control switch...

Could I use the stock fog light switch?

 

Yes you can...Solid green is (+) and the green with a white stripe is your (-)

 

You can also use an add a circuit, and tap into the TAIL circuit behind the coin holder. That only sends power when your parking and headlights are one.

 

But it won't dim with the rest of the dash lights.

 

I'm not too sure on how these switches wire up so I'm not sure on what exactly was needed.

 

Hey OP show us the ass side of the switch you have...

 

Yeah you can, I just chose to use traction control because it was easier to access