RisingWithoutWings - 2016 TRD Off Road-Build

Hi TacomaWorld!

This thread will document my build for my 2016 Tacoma TRD Off-Road 4x4.

Follow me on Instagram @RisingWithoutWings

Truck Video:



Modifications completed to date:
- 5% Llumar ceramic tint to all windows
- 40% Llumar ceramic tint to front windshield

- Full LED interior upgrade
- RSI Platinum LED Bulb Kit for low and high beams
- Rigid Dually Fog Lights
- JDM ASTAR 800 lumens Reverse Lights

- Viper LCD 2-Way Security + Remote Start System
- Pop & Lock Power Tailgate Lock
- Side Marker Light Overlay from Import Equipment
- Escort Max 360 Radar Detector with BlendMount / MirrorTap
- WeatherTech FloorLiner

- TRD Pro Grille
- Safari Snorkel
- Hood wrapped in Matte Black
- Rigid Industries Toyota Tacoma Grille
- Rigid Industries E-Series 20" Midnight Edition

- ICON Vehicle Dynamics Suspension System - Stage 5 w/ 700lb springs
- OME Dakar HD Leaf Pack
- Icon Rear Hydraulic Air Bumpstop System
- Wheeler's Front SuperBump Bumpstop
- Toytec 1" body lift
- RCI Off Road Rock Sliders
- Tacoma 8.75", 4.88 Ratio, Nitro Front & Rear Gear Package Kit

- Hypertech In-line Speedometer Module
- Yaesu FTM-400DR (HAM Radio) w/ Diamond NR73BNMO Dualband Mobile Antenna
- Midland 75-822 CB Radio w/

$46 FireStik MK-204R Adjustable SS Door Jamb Antenna Mount Mini-Kit

FireStik MK-204R Door Jamb Antenna Mount
- sPOD HD Switch Panel for 8 Circuit SE
- sPOD 8 Circuit SE System w\Touchscreen (in the cargo area)
- ARB On-board High Performance 12 Volt Twin Air Compressor with 1 gallon tank(Slee Off Road bracket)
- National Luna Dual Battery Split System DIY Kit
- BlueSea Systems Fuse Box
- 2 Optima Yellowtop D34/78
- Waterproof LED HOOD & BED light kits

- CBI Winch Mount 3rd gen Tacoma
- Pelfreybilt Aluminum Plate Bumper
- WARN VR10000-s
- Factory55 Hawse Fairlead 1.0
- Factory55 FlatLink
- TRD Pro Skid Plate
- Pelfreybult Aluminum Mid, Rear and gas tank skids

- A.R.E. V Series Topper with Windoors and LED light strips
- FrontRunner SlimLine II Tray Roof Rack

- FrontRunner SlimLine II Tray Roof Rack
- Rigid Industries E2-Series 40" Combo LED Light Bar
- Rigid Industries SR-Q2 Series Diffusion LED Light

- 285/75/R16 BFGoodrich All-Terrain T/A KO2s
- Method Race Wheels NV 16x8 with 6 on 5.5

- 315/70/R17 BFGoodrich All-Terrain T/A KO2s
- Method Race Wheels NV 17x8.5 with 6 on 5.5

- ARB drawers
- ARB Element Fridge


Future Modifications:
- Rear bumper


etc
How she sits currently:

 

Nice set up. Curious about your 1in lift. Was it easy to install? Do you think its a good mod?

 

New Photo after tire and wheel install. Tires do rub slightly but waiting on ICON suspension

 

How is the wind noise with the Slimline roof rack?

 

It's not that bad. You can really only hear it when you're traveling at highway speeds. I normally have some music playing so it's hardly noticeable.

 

hi was the 1 inch toytec bodylift tough to do does this void warranty thanx for your time

 

great Mods. thanks for sharing. Where did you mount your ARB air compressor??? I don't see any room under the hood.
I have the ARB 12 volt as well

 

latest photo

 

I mounted it on top of the fuse box with a custom bracket. Slee Offroad also makes a custom mount, but I couldn't buy it because it would have gone where I installed my second battery
http://www.sleeoffroad.com/products/products_air.htm

 

It was pretty easy to install, about half a day. I did it with the help of one other person. Anything you do to your vehicle should not void your warranty. If you run into any issues with your truck, Toyota would need to prove that the 1 inch lift caused the problem. I am no expert so please do your research and install at your own risk.

 

I'm curious about the CBI winch mount, first truck I've seen one on. Do you like it? How was the install, have to remove/cut anything? Could you post a few extra pictures of it as the picture on there website is pretty terrible.

 

The install was very easy and straight forward. They actually didn't send instructions so I called them and let me know I shouldn't need instructions (which I thought was odd). Once I took off the bumper I realized that it was indeed an easy install. You just remove the OEM bumper dampener and install the hidden winch mount onto the OEM bolts. They send additional support brackets that require you to temporarily remove the sway bar but I opted to not install the brackets. I called and they said that it was highly recommended I install the brackets if I am doing heavy winching (which I am not at the moment).

I really like how it came out and I think it's very low-key but very functional. I am using a (now "old") WARN VR 10000-S so I didn't need to remove and relocate the winch solenoid. Some of the new series of WARN winches have the solenoid located in the center of the winch so you'll need to remove it and relocate it because it will hit a bracket in the engine bay. I also got the wireless controller which is great but you can still access the winch with the hood open to release the spool manually if you needed to.

 

Can you show pics of the work you did inside?

 

thank you for taking the time to reply....gonna give it a shot!!

 

I'll try and post a few photos later today of the engine bay

goodluck!

 

i like your grille

 

is this with the Toytec 1" BL AND the Icon suspension on? or just the BL?

 

Only 1" body lift with 285/75R16 (rubs a little) . Suspension will come early next year.

 

Sub'd