OME 885 Coils with spacers

I just bought some OME 885 coils to put onto my stock TRD struts along with two spacers, one which is 1/2inch for the driver side and another that is 1/4 inch for the passenger side. I was told by 4wheel offroad that it would not work and that I had to buy OME struts because OME coils don't work with other companies. Plus I was told that coils can't be mixed with spacers. Will this set up work?

 

Why do people think their truck leans . I have OME 3885s and bilsteins 5100 and no leaning . I had a 2007 Tacoma lifted with coil over spacers and no lean ever . Sorry to ask but what do these people weigh that they think they need a bigger spacer on left side . I know the fuel tank is on that side but in the rear . I have OME with bilsteins 5100s and no problem fitting them together . What are you putting in the rear for a lift ?

 

If i remember 1 reason is that More weight on driver side due to gas tank

 

Those coils won't work with stock Bilstein (4600) struts. You need either 5100's or OME struts to run them. You can use the top plate spacer's with the OME struts but you will have the same size on both sides. You only need the trim packer on the driver's side.

 

The battery also.

 

885's aren't going to provide much lift. That's a 2nd gen spring. 886-888 are for 3rd gens

 

Thank you this is super helpful!