3rd Gen 4Runner SR5

Discussion in '4Runners' started by LiamBal, Aug 14, 2016.

  1. Aug 14, 2016 at 1:44 PM
    #1
    LiamBal

    LiamBal [OP] New Member

    Joined:
    May 11, 2016
    Member:
    #186715
    Messages:
    3
    Gender:
    Male
    First Name:
    Liam
    Vehicle:
    2001 Forest Green 4Runner SR5
    Been wanting to do an inexpensive way for a "lift" on my Runner. I know you can change springs to "lift." Stock coil springs, which on a 3rd Gen 4Runner are in the front and rear, only give 1 & 1/4 lift. Any suggestions on new dimensions I should get and from any specific manufacturer? Want a 2 inch lift, thanks.
     
  2. Aug 15, 2016 at 3:31 PM
    #2
    Husky Driver

    Husky Driver Kyna's chauffeur

    Joined:
    Apr 17, 2014
    Member:
    #127883
    Messages:
    729
    Gender:
    Male
    First Name:
    Kipp
    40°35'09.0"N 105°04'38.3"W
    Vehicle:
    2k T4R3 SR5 (Sport Edition Highlander SX) TRD
    Toytec Ultimate 3" lift susp w/ OME 891 rear coils, Bilstein 5100 shocks front & 5125 rear, ARB 'Roo Bar, Warn VR10k, 0.7, 2 & 11-meter 2 way radios, Nitrogen inflated 33" BFGoodrich All-Terrain T/A KO2s, FlexFuel E-85 conversion, AFe lifetime filter, Savage Offroad rock sliders, Ryno All Terrain 4.5mm skid plates, Line-X coatings on the armor, LifetimeLED & Rigid Industries LED headlights, UltraGauge 1.2, T3q 4.10 eLocker with armor from LROR, AmsOil lubricants used throughout. CBI plate rear bumper with swingaway, SPC Light Racing UCAs, ARB SS170HF Safari snorkel w/ Afrikaans centrifugal pre-cleaner, Tacoma antenna mod, TRD Supercharger w/ URD 7th inj. & URD pulleys, Anti-Dark engine bay lighting system. Having gone 250k, Aug 2016 was the time to replace the original clutch & get the driver's seat rebuilt/stuffed. Front & back Weathertech liners. Tundra front disc brake swap. Full length Rocky Mountain Rack with 40" lightbar & alternating strobe rear dust lights. I used a warm weekend in March 2022 to finally install my brand new, from old stock, 2000 4Runner driver's seat. $800 directly from the factory in Sapporo, Hokkaido, Japan.
    First you'll have to define: "Inexpensive". You might be on the wrong board. :evil:
     

Products Discussed in

To Top