REAR TURN SIGNAL ISSUES

MY REAR RIGHT REAR TURN SIGNAL LIGHTS UP WHEN I BRAKE. CHANGED ALL THE REAR BULBS BUT PROBLEM PERSISTS. ANY THOUGHTS?

 

Do you have the tow package, or any added - on trailer light wiring? If aftermarket add-on wiring - disconnect it to see if the issue goes away.

Also be sure the ground connection and continuity is good to the right tail/brake/signal light assembly. Use a jumper wire from a known good ground to test if needed.

 

Ok thanks, I'll try it out. The tow package is stock I believe, came with the truck when I bought it. I know little about the wiring set up, I took a look underneath and to each light fixture and didn't see anything unusual. What's a jumper wire LOL?

 

Turn off the all caps in your post. It is considered yelling on the internet...

 

Seriously? Ok, sorry.

 

Actually yes it is a thing:

http://netiquette.wikia.com/wiki/Rule_number_2_-_Do_not_use_all_caps

 

Actually, the "seriously" was meant to be sarcastic, not challenge your point. I agree, it is considered yelling. HAVE A GOOD DAY!

 

Actually I wasn't being a dick. I only wanted to make sure you knew. There are a lot of wet ends on the internet that just don't know any better.

It's all good on this end.

Why are you yelling again?