1st Gen lifts

Same. Pwm and some bora wheels spacers set me free

 

Lol I don't like wheel spacers so I got aftermarket wheels and 33 12.50s

 

When my wallet allows, that will be my next route as well....aaannnddd>>>

 

Completely agree lol

 

So I guess it's a no on the body lift. lol I thought about spacers but he said it wouldnt help. I guess I will have to take the running board cap off as well since its right there next to pinch weld. It rubs there also.

 

YotaOverAll, you seem to have about the closest setup, so all you did was the pwm and you had no further issues?

 

Many many people on here are running 33s with 0-3" lift after pinch weld and proper backspacing. You only want enough spacing to clear the frame. The more you add the more it will rub the body while turning

 

2.5 ome lift with 285/75/16(32.8) here, mine only rubs lock to lock on the frame and no pinch mod here

 

That's all I've done. The driver side just barely Knicks the bumper but I only know cause if you get close you can barely see if you're looking for it

 

I have the same size tires on mine and all I'm running is a leveling kit and no rub at all.