Front Range Offroad Rock Surfer IFS Skid Plates

We're excited to release our IFS Rock Surfer skidplate set for 96-02 4Runners! We started with a basic skid, like what other offer, and quickly found we needed to add a LOT more for protection in offroad use! A Strong mounting system design was required. Radiator protection was a must, ESPECIALLY at the outer corners! Internal reinforcements to prevent collapse. Easy install as possible.

-3/16" steel construction
Welded corners for supreme strength and protection for that low hanging radiator
-Unique clamp on style mounts, hardware never loosens, overtightening wont crush yours frame!
-100% bolt-on, with provided hardware and brackets
-Welded internal reinforcements
-TWENTY bolts mount these skids!

Rock Surfers IFS Skidplate Set - Front Range Off-Road Fabrication

Available at a discount for pre-order now!!

 

No 1st gen Tacoma option?

 

1st gen or GTFO

 

3rd gen t4r shares the same as 1st gen tacoma.

confirm w/ vendor but i'm 99% sure

 

All three skid pieces for this price? Any pictures of how the belly pan attaches? It looks like it might mount to the transmission rear mount crossmember but what does the very aft end attach to? Also, how far past the t-case does it extend?

 

Interested if these fit first gen Taco...

Also, when is that LT kit coming out?

 

@Front Range Off Road

not a lot of people selling first gen skids,
answer some questions
get some sales
profit

 

Looks to me like it stops at the tranny mount cross bar. No t case coverage.

 

There is a rear crossmember added in behind the tcase, full tcase coverage at that point. This post was a little preemptive by one of the guys here, and we're close to releasing said crossmember, but theyre not done just yet!

 

All 3 pieces, however the tacoma will need an additional crossmember piece (releasing shortly) to mount the final plate.

 

If we utilize the "Pre-Order" option for the discount, will it include the unreleased/unfinished part for our 1st Gen Tacoma once it comes out?

 

^^^^ what he said. Be a great setup if so

 

Definitely interested in this...

 

How far past the t-cast does the 3rd piece end?

 

Was this ever released?

 

Same ^^^

 

OP hasn't been online in almost 2 years. Best to contact directly by phone for an answer