NJ B.S. Thread

Sweet. Thank you

 

Front coil overs ordered. Micah is swapping the springs, revalving, and shipping them today!!! Down south is awesome!!

 

this was my problem i was telling you about with the wheelset and lugs i removed at your place remember? seems toyota put the bare min studs on the 2nd gens, there is a sticky about this in the wheel and tire forum.

 

I was told that you should have atleast the thickness of the stud. Example on a half inch stud you should have a half inch of thread being used. I got used wheels from a Chevy and they were very thick and I was only using a small amount of the studs. Never had a problem but just for peice of mind I had longer studs added to my new hub assemblies. Rear is still stock though.

 

When I got my new tires and rims, Discount Tire recommended a minimum of 8-9 turns. I get about five full turns before hitting the torque value..

 

That's right, I remember you saying that now. Well, at least I'm not the only one..

 

Yes that is the industry standard.

 

I don't think that it was Karen that bent that trans skid.

 

Which UCA's are those?

 

I don't know the answer to this cuz I don't have any experience with them. I have stock 16's.

 

No. I have your 265's in my garage

 

Shut up Lloyd. That's my story and I'm sticking to it...

 

And the stinky pee on your passenger seat wasn't hers as well. LOL.

 

Lol it's all good I was just busting stones. I feel like we got off on the wrong foot and all I really want is to help when I can and hope everyone get everything they want out of there trucks

 

You must have 50" tires because yo just took the high road

 

Unfortunately there only 47's

 

I agree. I should've taken a step back and taken your words for what it was worth... Advice.

I would give you a hug and a big wet kiss, but @The Hunter and @HolyHandGrenade might get jelly.

 

Never mind. You're obviously not equipped for the HIGH road

 

I am just a slightly different road

 

Stop it Lloyd, you can't run the high road on 255's...