1996 1st Gen Tacoma - Parting it Out

Sure thing, I might also need a couple trim retaining pins if you still have them on the truck. So that's the window crank horseshoe pin, (also the plastic stress ring behind the crank), and the gas door cam lock arm.

Just wondering why you're parting it out? Your tacoma looks like it's in really really decent condition. You can get a lot more for it by selling it, especially since it's a 4x4. If you're just using it for firewood you can just get a downgraded beater pickup and have some extra cash from the tacoma.

 

Yeah, the body is in great shape but the frame is gone. There are multiple holes and it won't pass inspection anymore. A few years ago I tried to get in on the recall but I missed the cut off date by (2) months; they start the clock after the original owner buys the vehicle but I'm the second owner and had no idea when time was up.

 

How much for ac evaporator?

Also how much for the little triangle piece that covers the mirror bolts

 

Think it's called a sail panel?

 

BartMaster1234,

See the attached photo. $10 total if I can just stuff them in an envelope. PM me your info if you're interested.

 

anthony250f, see all the attached photos.

The interior mirror bolt covers are in mint condition, $10 total for both (excluding shipping).

The AC evaporator is not in great shape. I broke a mounting tab during removal; it's part of the plastic body. Some cooling fins are missing, the back fins are bent here and there. I had to cut one of the input/output tubes because I couldn't get the bolt out of the coupling/clamp (or too lazy at the time to try). I didn't use the air conditioner almost at all, and I know it wasn't working when I took this part out. $30 for the part (excluding shipping).

 

Great! You don't happen to have the two trim retaining pins on the sides of the lower radio console panel (two power ports, storage pocket) below cigarette lighter.

 

Sorry I was talking about the one behind the dash. I need the two tubes that run through the firewall.

 

How much for the front diff?

 

anthony250f, my bad; I don't know the parts of an AC system. I'll see if I can get it out sometime this weekend. You want just the tubes or the unit including the tubes?

 

Blackdawg, haven't got to that yet. It will be a while.

 

Just the tubes. Easier to ship and stuff. How much for the tube ?

 

anthony250f, see the attached photo. $30 for the tubes + $10 for mirror bolt covers + $14 shipping by USPS. PM your information if you're still interested.

By the way, in case anyone is interested, to get to where these tubes are attached is a lot of work.

 

Are the threads ok on the bigger tube??

 

Yeah, they're okay. There's aluminum corrosion or doping from the coupler; it was really difficult to separate. The green is dye from when I tried to refill/leak test it about 8 years ago.

 

Hey man! Do you have the vacuum tank thats located in the drivers side front wheel well?
Funny too cause your truck as rust in the exact same spots as mine

 

Spence8818, I haven't reached the point of removing engine parts yet since I still need to move the truck around for now (unless there's a large incentive for me to do so).

 

Okay, just to confirm I'm fairly certain this peticular part (located in front of the drivers side front wheel) only helps actuate the 4x4 system, if you part it out let me know Im getting g close to trying to make one out of pvc lol

 

Evan...thanks bro! Got the visors today, already installed. Those things are in mint condition!

 

LogCabins, great to here for something 20 years old. I'm glad you haven't died from multiple hurricane attacks!