Help with lift

I've got a 2012 Tacoma with a 3" leveling kit in the front and a 2" in the rear. I'm trying to clear 33x12.50x20 all terrian tires with a 20x12 moto metal 962. They scrub the trim on the fenders, anyone have any idea on how much high to go to clear the rims without buying a $1,500 6" lift??

 

Time to start trimming if you don't want to go with a full lift kit.

JT

 

Get out the

 

Yeah that what I'm kinda trying to avoid lol.

 

I'm just gonna buy I bigger lift but what size would I need to clear 33/12.50/20 with a 20x12 rim?

 

No lift needed, just an angle grinder

 

LIFTMAN!!
@geekhouse23

 

Pics where you rub?

 

This is a family site

 

It was rubbing on the stock trim. But I ended up ordering a 6" lift for it.

 

Sorry to hear that OP

 

RC 6" lift. 20x12 moto metal 962. 33x12.50 nitto terra grapplers.

 

haste makes waste. Take your time. If you have a prerunner you could go the spindle route a 4 inch lift. You will still need to cut the very lower part of the fender about 1.5 x 1.5 area at very lower corner. Good luck! Going higher won't solve all problems it just introduces new ones.