What Have You Done To Your 3rd Gen Today?

its a baby coal roller

 

J Red - Can't say that I like it - no, on second thought I know that I don't!
But, it's your truck and if it is your thing and you like it don't worry about
what others think or say.

 

Looks hot! Newbie here... how is the LED in the Grille wired up? Thanks!

 

I appreciate all feedback. Good or bad, like or dislike.

 

Cut the cab mount a little. see how it does, then go from there

 

1st, 2nd, 3rd.... They're all Tacoma's, right!?! Thought I might inspire others is all....

 

Radio in and wired. Installing the antenna tonight, pics to follow...

 

i've always been so interested in radio, but never got into it. What do you use it for? I've heard most activity on there now is minimal at best.

 

I think on road activity might be minimal, can't say for sure, but places I've been wheeling have required some sort of non-cellular communications while on property.

 

^^^^ what he said

 

How is illumination of the road? I replaced my low beams with LEDs (not OPT7) based on another thread and they are useless....might as well not had any lights bulbs installed at all. It appeared bright when looking at the headlight, but the road was not illuminated at all. I have heard that our projector headlight housing may contribute to this effect when using LEDs.

 

Not exactly my style, but I like that it's something different. If you like it that's all that matters!

 

I would never do this to a truck... Lol! It was a failed attempt at trolling. I can't even stir up some hate with the Turd Gen guys! Lol! I'm such a failure!

 

I was wondering if a radio would fit in there, thanks for posting! Where'd you route the wiring?

 

LoL too big of fenders with no enough tire

 

I believe the silicone oil base is what keeps it from turning white when rain drops hit the plastic. 95% of anything oil base products going to be flammable and being in the chemical field, you'd be amazed how many plastics come from Naphtha or a variance of.
I will definitely take a look at 303 though. Thank you for the advice.

 

Power wire went forward, out the grommet by the steering shaft. Antenna went back to the grommet under the passenger seat. I had to cut the back of the Qi charger trim to fit the antenna cable.

 

The light bar mounts are Rago mounts @ragofabrication
The light bar is a "50 RC X5 with whistle and vibration reduction technology.
The power cable run along the side of the windshield.
Thanks I appreciate the compliment

 

two bottles of wine on the passenger's rear door, keeping it classy I see

 

it honestly took me like 15 minutes lol I just used these plastic tab pullers to push the wire through in between the edges of the head liner and the rubber trim pieces but it all cleaned up very nice. It still looks center on the right window. It didn't want it mounted on the center sliding section. In all the whole process took 30 minutes since I knew exactly what fuse to piggyback on with the add-a-fuse