AZ BS Thread 4.2⁰

Im at that plus a full shift at work. It's going to be a long day.

Happy birthday @HectoRome!

 

Who has done first gen taco/3rd gen t4r wheel bearings?

 

Fronts or Rears? I've had both done. The rears need to be pressed. More than worth it to have a shop do bearings and seals. Bearings and seals with labor is around $800 for the rear.

Front you need to remove the spindle and then take that to a shop. They need to be pressed off and on too. Saves money on labor to remove the spindle. Then the fronts are about $400 with parts and labor assuming you bring just the spindles.

 

Looking at just the front right now. I think my rear is leaky too though. I know we just did sams at a shop and it was around $700 for both sides in the end.

What are the symptoms of a bad front bearing? I notice I get a ton of noise that sounds like rocks being kicked up at my cab when I turn left. Sounds like its coming from the driver side.

 

Happy Saturday, Happy Birthday Hectorome!

The Magnaflow cat back I had built is on point. At part throttle around 2k on the freeway there almost zero tone near stock silent. As soon as you punch the fun pedal, it comes to life with a symphony of engine noise I had no idea a Camry motor could even make. I went 3" past the collector flange and then down to a 2.5" tail pipe with an oval stainless TRD style tip. Looks and sounds fantastic. Not bad for 3 bills.

 

I would say symptoms are just overall play. You can jack it up and then grab the wheel. It shouldn't move at all. If it does, your bearing is toast. I didn't really have any issues, but I welded on spindle gussets. So I figured why not replace everything while I'm at it

 

Happy birthday Hector

 

Happy Birthday @HectoRome

 

I went

$890 magnaflow 19291 : cat-back, street series, for 2016-2023 toyota tacoma 3.5L, 73.7" bed length, extended cab, 60.5" bed length, crew cab, single passenger side rear exit

magnaflow 19291 cat back on my '16 and the it brings out the beast in that 3.5.

 

Bwahaha not yet. Just coffee and a cigarette before checking work emails and this goddamn website that feels more like a responsibility now than when I first signed up a couple of years back.

 

Anyone want a 65" or 75" tv? Pm me. Work is letting some crazy deals go today

 

Yep....

 

PM'd.

 

Started with a palm tree

Now we're here

It's hard to tell but that was a good 10x10 section of just wasted space for that Palm tree that just dropped deal in the pool year around. So now I gained a lot more space to expand the pool that way and or a nice corner seating area with pavers or something.

 

Good deal on an AERO AR if anyone is looking. Use code LBL for another $20 off:
http://www.brownells.com/rifle-part...=Avantlink&utm_content=NA&utm_campaign=Itwine

 

If you're an IPA fan, go find this at Bevmo. Super expensive but freaking amazing. @XPOTRPR I know your a hop head too, gotta try it.

 

Bet that buffalo one is interesting

 

Ya those look crazy haha

 

Bacon soda was gross. Not looking forward to this but I'll try them.