3rd gen OR coils to level?

I have 3rd gen OR all the way around on my '14 SR5. It lifted it about an inch, as many had suggested. It rides nice, looks great. No complaints. Easy level for a cheap price. I'll be up in the trails this weekend testing it out.

 

You are talking about the 2016 Bilsteins? I wonder if they are the same as the 2015's.

 

Correct. And the 16's are longer.

 

Well shit there goes putting the 16 coils on the 15 billy's. I didn't really want to run the Hitachi's.

 

I strictly eyed it up, so I could be wrong but it seemed longer than my 14 coil.

 

Do you know if the shocks fully extended are the same size?

 

I just briefly looked at my '14 side by side with the '16 OR as I had a friend's shop put them on. I didn't personally do it myself. But they were longer side by side (both the body, and to me, looked like the coil as well). But I could be wrong about the coil itself, because I just took a quick look and that was it. I didn't bother to measure. I can tell on the truck that the front does sit higher though. I apologize, I wish I was more thorough with it so I could help answer more specific questions like this, for members in the future.

 

Thank you for the information. I tried a couple of other Toyota parts departments and I called Bilstein this afternoon and neither could help. Bilstein is still in R & D for an oem replacement. They build the shocks for Toyota but it's proprietary information so i got no where with that. I am just going to strap on the Hitachi's put a 1/2 top spacer and be done with it. Hope the ride isn't as bad as some have said.

 

i have 2016 trd sport coils with 5100s set to .85 on my 08 and Im sitting at 22" center of hub to fender. No pre lift measurements tho