1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Toynado Quicksand build

Discussion in '3rd Gen. Builds (2016-2023)' started by Toynado, Feb 13, 2016.

  1. Jul 21, 2016 at 4:28 PM
    #221
    Rhubarb

    Rhubarb Well-Known Member

    Joined:
    Oct 26, 2015
    Member:
    #167710
    Messages:
    256
    Gender:
    Male
    Big D (TX)
    Vehicle:
    2016 OR, Manual Trans
    So what do you need pics of? The top plate of the Truck Covers USA?

    Sorry, I didn't ask him about his topper
     
  2. Jul 21, 2016 at 8:18 PM
    #222
    Toynado

    Toynado [OP] Well-Known Member

    Joined:
    Oct 16, 2015
    Member:
    #166816
    Messages:
    1,393
    Gender:
    Male
    SF Bay Area
    Vehicle:
    2016 TRD OR DCSB Quicksand
    EXTERIOR: Toytec Boss 2.0 Dakar CS047R Leaf Springs Tailpipe chopped Pelfreybilt Front full hoop front bumper w/ Pelfrey fairlead Pelfreybilt Rear standard bumper Pelfreybilt Aluminum IFS, Mid, Rear (exhaust reroute) & Gas tank skids Pelfreybilt Fuseplate w/ 12 circuit fuse block All-Pro Apex Sliders ProComp 7036 17"x9" -6 offset BFG 275/70R/17 KO2's Warn VR10000-S winch Baja Designs S8 light bar & Squadron sports amber pods in front bumper Baja Designs S2 flush pods in rear bumper Baja Designs Squadron Pro amber pods on Caliraised ditch light brackets @rrentrop reflective black tailgate inserts RSI LED's for regular & high beams Prinsu Cabrac Custom Tradesman Truck Top by Access Manufacturing w/ Powertank 8"propane tank mount & Yakima tracks on the roof INTERIOR: Warrior Products door sill protectors Husky Weather Beater floor mats front & rear Coverking arid multicam seat covers in the front Midland 75-822 CB w/ 4' Firestick antenna on C4 Fabrication tailgate mount Consolevault Hondo Garage iPhone mount
    I'll be able to get some pics of whatever you guys need on Sunday.

    I'm thinking that it would be easy enough to make a bracket that would sit outside the Yakima tower and spread the weight from the end of each bar to the top of the sides of the beds. Do that and put a third bar in the middle and I'm sure it'd be plenty strong enough to support a tent.
     
  3. Jul 21, 2016 at 9:02 PM
    #223
    Toynado

    Toynado [OP] Well-Known Member

    Joined:
    Oct 16, 2015
    Member:
    #166816
    Messages:
    1,393
    Gender:
    Male
    SF Bay Area
    Vehicle:
    2016 TRD OR DCSB Quicksand
    EXTERIOR: Toytec Boss 2.0 Dakar CS047R Leaf Springs Tailpipe chopped Pelfreybilt Front full hoop front bumper w/ Pelfrey fairlead Pelfreybilt Rear standard bumper Pelfreybilt Aluminum IFS, Mid, Rear (exhaust reroute) & Gas tank skids Pelfreybilt Fuseplate w/ 12 circuit fuse block All-Pro Apex Sliders ProComp 7036 17"x9" -6 offset BFG 275/70R/17 KO2's Warn VR10000-S winch Baja Designs S8 light bar & Squadron sports amber pods in front bumper Baja Designs S2 flush pods in rear bumper Baja Designs Squadron Pro amber pods on Caliraised ditch light brackets @rrentrop reflective black tailgate inserts RSI LED's for regular & high beams Prinsu Cabrac Custom Tradesman Truck Top by Access Manufacturing w/ Powertank 8"propane tank mount & Yakima tracks on the roof INTERIOR: Warrior Products door sill protectors Husky Weather Beater floor mats front & rear Coverking arid multicam seat covers in the front Midland 75-822 CB w/ 4' Firestick antenna on C4 Fabrication tailgate mount Consolevault Hondo Garage iPhone mount
    I know one of you guys are going to figure out/create something that's going to work. Just let me know how I can help!
     
  4. Jul 23, 2016 at 7:03 AM
    #224
    Rhubarb

    Rhubarb Well-Known Member

    Joined:
    Oct 26, 2015
    Member:
    #167710
    Messages:
    256
    Gender:
    Male
    Big D (TX)
    Vehicle:
    2016 OR, Manual Trans
    Thanks, Toy. I took some pics and sent them via PM to 3d. I think I will probably settle on the new Core bar by Yakima along with the Timberline towers. The Core bars are rolled steel, supposedly much stronger than the aluminum. Plus I might even put 3 bars on the thing, not sure. Waiting for my group buy to trigger before springing for the bars, though.
     
  5. Jul 23, 2016 at 8:16 AM
    #225
    Toynado

    Toynado [OP] Well-Known Member

    Joined:
    Oct 16, 2015
    Member:
    #166816
    Messages:
    1,393
    Gender:
    Male
    SF Bay Area
    Vehicle:
    2016 TRD OR DCSB Quicksand
    EXTERIOR: Toytec Boss 2.0 Dakar CS047R Leaf Springs Tailpipe chopped Pelfreybilt Front full hoop front bumper w/ Pelfrey fairlead Pelfreybilt Rear standard bumper Pelfreybilt Aluminum IFS, Mid, Rear (exhaust reroute) & Gas tank skids Pelfreybilt Fuseplate w/ 12 circuit fuse block All-Pro Apex Sliders ProComp 7036 17"x9" -6 offset BFG 275/70R/17 KO2's Warn VR10000-S winch Baja Designs S8 light bar & Squadron sports amber pods in front bumper Baja Designs S2 flush pods in rear bumper Baja Designs Squadron Pro amber pods on Caliraised ditch light brackets @rrentrop reflective black tailgate inserts RSI LED's for regular & high beams Prinsu Cabrac Custom Tradesman Truck Top by Access Manufacturing w/ Powertank 8"propane tank mount & Yakima tracks on the roof INTERIOR: Warrior Products door sill protectors Husky Weather Beater floor mats front & rear Coverking arid multicam seat covers in the front Midland 75-822 CB w/ 4' Firestick antenna on C4 Fabrication tailgate mount Consolevault Hondo Garage iPhone mount
    Those Core bars look good. Pissed how they came out right after I got all my setup.

    Which group buy?
     
  6. Jul 24, 2016 at 8:24 PM
    #226
    USDashCamera

    USDashCamera Put it in H

    Joined:
    Jun 22, 2016
    Member:
    #190311
    Messages:
    640
    Gender:
    Male
    Vehicle:
    2017 Quicksand TRD OR
    did you remove the door handles to spray the back of them? could that affect the auto unlocking feature?
     
  7. Jul 24, 2016 at 10:08 PM
    #227
    Toynado

    Toynado [OP] Well-Known Member

    Joined:
    Oct 16, 2015
    Member:
    #166816
    Messages:
    1,393
    Gender:
    Male
    SF Bay Area
    Vehicle:
    2016 TRD OR DCSB Quicksand
    EXTERIOR: Toytec Boss 2.0 Dakar CS047R Leaf Springs Tailpipe chopped Pelfreybilt Front full hoop front bumper w/ Pelfrey fairlead Pelfreybilt Rear standard bumper Pelfreybilt Aluminum IFS, Mid, Rear (exhaust reroute) & Gas tank skids Pelfreybilt Fuseplate w/ 12 circuit fuse block All-Pro Apex Sliders ProComp 7036 17"x9" -6 offset BFG 275/70R/17 KO2's Warn VR10000-S winch Baja Designs S8 light bar & Squadron sports amber pods in front bumper Baja Designs S2 flush pods in rear bumper Baja Designs Squadron Pro amber pods on Caliraised ditch light brackets @rrentrop reflective black tailgate inserts RSI LED's for regular & high beams Prinsu Cabrac Custom Tradesman Truck Top by Access Manufacturing w/ Powertank 8"propane tank mount & Yakima tracks on the roof INTERIOR: Warrior Products door sill protectors Husky Weather Beater floor mats front & rear Coverking arid multicam seat covers in the front Midland 75-822 CB w/ 4' Firestick antenna on C4 Fabrication tailgate mount Consolevault Hondo Garage iPhone mount
    Did them much like you do to spray the emblems and then used a small brush the get as much as I could on the inside. Once dry I put a strip of electrical tape on the back of each handle. You can still use auto lock. They are holding up well. Love the look!
     
  8. Jul 26, 2016 at 1:05 PM
    #228
    Toynado

    Toynado [OP] Well-Known Member

    Joined:
    Oct 16, 2015
    Member:
    #166816
    Messages:
    1,393
    Gender:
    Male
    SF Bay Area
    Vehicle:
    2016 TRD OR DCSB Quicksand
    EXTERIOR: Toytec Boss 2.0 Dakar CS047R Leaf Springs Tailpipe chopped Pelfreybilt Front full hoop front bumper w/ Pelfrey fairlead Pelfreybilt Rear standard bumper Pelfreybilt Aluminum IFS, Mid, Rear (exhaust reroute) & Gas tank skids Pelfreybilt Fuseplate w/ 12 circuit fuse block All-Pro Apex Sliders ProComp 7036 17"x9" -6 offset BFG 275/70R/17 KO2's Warn VR10000-S winch Baja Designs S8 light bar & Squadron sports amber pods in front bumper Baja Designs S2 flush pods in rear bumper Baja Designs Squadron Pro amber pods on Caliraised ditch light brackets @rrentrop reflective black tailgate inserts RSI LED's for regular & high beams Prinsu Cabrac Custom Tradesman Truck Top by Access Manufacturing w/ Powertank 8"propane tank mount & Yakima tracks on the roof INTERIOR: Warrior Products door sill protectors Husky Weather Beater floor mats front & rear Coverking arid multicam seat covers in the front Midland 75-822 CB w/ 4' Firestick antenna on C4 Fabrication tailgate mount Consolevault Hondo Garage iPhone mount
  9. Jul 26, 2016 at 1:25 PM
    #229
    Jystr

    Jystr IG: TW_Jystr

    Joined:
    Jul 22, 2015
    Member:
    #160034
    Messages:
    4,688
    Gender:
    Male
    First Name:
    Jason
    Leesville, LA
    Vehicle:
    2016 Barcelona Red Tacoma TRDOR
    See build thread
    Wait until you get the high clearance bumper. It's like crawling into a damn cave. It's so easy to. Lean and do work on it now!

    I did the same thing. But went into the gas cap area with my breather
     
  10. Jul 26, 2016 at 2:48 PM
    #230
    Toynado

    Toynado [OP] Well-Known Member

    Joined:
    Oct 16, 2015
    Member:
    #166816
    Messages:
    1,393
    Gender:
    Male
    SF Bay Area
    Vehicle:
    2016 TRD OR DCSB Quicksand
    EXTERIOR: Toytec Boss 2.0 Dakar CS047R Leaf Springs Tailpipe chopped Pelfreybilt Front full hoop front bumper w/ Pelfrey fairlead Pelfreybilt Rear standard bumper Pelfreybilt Aluminum IFS, Mid, Rear (exhaust reroute) & Gas tank skids Pelfreybilt Fuseplate w/ 12 circuit fuse block All-Pro Apex Sliders ProComp 7036 17"x9" -6 offset BFG 275/70R/17 KO2's Warn VR10000-S winch Baja Designs S8 light bar & Squadron sports amber pods in front bumper Baja Designs S2 flush pods in rear bumper Baja Designs Squadron Pro amber pods on Caliraised ditch light brackets @rrentrop reflective black tailgate inserts RSI LED's for regular & high beams Prinsu Cabrac Custom Tradesman Truck Top by Access Manufacturing w/ Powertank 8"propane tank mount & Yakima tracks on the roof INTERIOR: Warrior Products door sill protectors Husky Weather Beater floor mats front & rear Coverking arid multicam seat covers in the front Midland 75-822 CB w/ 4' Firestick antenna on C4 Fabrication tailgate mount Consolevault Hondo Garage iPhone mount
    I debated the reg & high clearance and went with regular. Wish I could fast forward time two months. Until then I live vicariously through your pics.
     
  11. Aug 1, 2016 at 6:29 PM
    #231
    Toynado

    Toynado [OP] Well-Known Member

    Joined:
    Oct 16, 2015
    Member:
    #166816
    Messages:
    1,393
    Gender:
    Male
    SF Bay Area
    Vehicle:
    2016 TRD OR DCSB Quicksand
    EXTERIOR: Toytec Boss 2.0 Dakar CS047R Leaf Springs Tailpipe chopped Pelfreybilt Front full hoop front bumper w/ Pelfrey fairlead Pelfreybilt Rear standard bumper Pelfreybilt Aluminum IFS, Mid, Rear (exhaust reroute) & Gas tank skids Pelfreybilt Fuseplate w/ 12 circuit fuse block All-Pro Apex Sliders ProComp 7036 17"x9" -6 offset BFG 275/70R/17 KO2's Warn VR10000-S winch Baja Designs S8 light bar & Squadron sports amber pods in front bumper Baja Designs S2 flush pods in rear bumper Baja Designs Squadron Pro amber pods on Caliraised ditch light brackets @rrentrop reflective black tailgate inserts RSI LED's for regular & high beams Prinsu Cabrac Custom Tradesman Truck Top by Access Manufacturing w/ Powertank 8"propane tank mount & Yakima tracks on the roof INTERIOR: Warrior Products door sill protectors Husky Weather Beater floor mats front & rear Coverking arid multicam seat covers in the front Midland 75-822 CB w/ 4' Firestick antenna on C4 Fabrication tailgate mount Consolevault Hondo Garage iPhone mount
    Package arrived from @Pelfreybilt today! It's a small step but one step closer to what's coming. The plan is to get this all wired up without electrocuting myself so that when the bumpers are ready it'll be just play and PLAY!

    I waited three months and change for the truck... Dear lord give me strength and patience to wait two months for the bumpers!

    image.jpg
     
  12. Aug 11, 2016 at 5:41 AM
    #232
    Cdcrap

    Cdcrap New Member

    Joined:
    Aug 11, 2016
    Member:
    #194296
    Messages:
    1
    Gender:
    Male
    First Name:
    Jayson
    Vehicle:
    Tacoma Dcab 6 ft bed
    Hi, I just got a Tacoma double cab 6 ft bed, sr5, I like the way you set it up, please tell me what tonneau cover you have on there , with the railing and it seem you have a Yakima on it too, of corse where you get it also and how much did you spend?
     
  13. Aug 11, 2016 at 6:19 AM
    #233
    Toynado

    Toynado [OP] Well-Known Member

    Joined:
    Oct 16, 2015
    Member:
    #166816
    Messages:
    1,393
    Gender:
    Male
    SF Bay Area
    Vehicle:
    2016 TRD OR DCSB Quicksand
    EXTERIOR: Toytec Boss 2.0 Dakar CS047R Leaf Springs Tailpipe chopped Pelfreybilt Front full hoop front bumper w/ Pelfrey fairlead Pelfreybilt Rear standard bumper Pelfreybilt Aluminum IFS, Mid, Rear (exhaust reroute) & Gas tank skids Pelfreybilt Fuseplate w/ 12 circuit fuse block All-Pro Apex Sliders ProComp 7036 17"x9" -6 offset BFG 275/70R/17 KO2's Warn VR10000-S winch Baja Designs S8 light bar & Squadron sports amber pods in front bumper Baja Designs S2 flush pods in rear bumper Baja Designs Squadron Pro amber pods on Caliraised ditch light brackets @rrentrop reflective black tailgate inserts RSI LED's for regular & high beams Prinsu Cabrac Custom Tradesman Truck Top by Access Manufacturing w/ Powertank 8"propane tank mount & Yakima tracks on the roof INTERIOR: Warrior Products door sill protectors Husky Weather Beater floor mats front & rear Coverking arid multicam seat covers in the front Midland 75-822 CB w/ 4' Firestick antenna on C4 Fabrication tailgate mount Consolevault Hondo Garage iPhone mount
    Thanks! It's a truckcoversusa.com tonneau. It comes from the factory with the Yakima rails installed as an option. It works great but ain't cheap so look around and see where you can get a good deal
     
  14. Aug 16, 2016 at 5:42 PM
    #234
    Toynado

    Toynado [OP] Well-Known Member

    Joined:
    Oct 16, 2015
    Member:
    #166816
    Messages:
    1,393
    Gender:
    Male
    SF Bay Area
    Vehicle:
    2016 TRD OR DCSB Quicksand
    EXTERIOR: Toytec Boss 2.0 Dakar CS047R Leaf Springs Tailpipe chopped Pelfreybilt Front full hoop front bumper w/ Pelfrey fairlead Pelfreybilt Rear standard bumper Pelfreybilt Aluminum IFS, Mid, Rear (exhaust reroute) & Gas tank skids Pelfreybilt Fuseplate w/ 12 circuit fuse block All-Pro Apex Sliders ProComp 7036 17"x9" -6 offset BFG 275/70R/17 KO2's Warn VR10000-S winch Baja Designs S8 light bar & Squadron sports amber pods in front bumper Baja Designs S2 flush pods in rear bumper Baja Designs Squadron Pro amber pods on Caliraised ditch light brackets @rrentrop reflective black tailgate inserts RSI LED's for regular & high beams Prinsu Cabrac Custom Tradesman Truck Top by Access Manufacturing w/ Powertank 8"propane tank mount & Yakima tracks on the roof INTERIOR: Warrior Products door sill protectors Husky Weather Beater floor mats front & rear Coverking arid multicam seat covers in the front Midland 75-822 CB w/ 4' Firestick antenna on C4 Fabrication tailgate mount Consolevault Hondo Garage iPhone mount
    Got my Pelfrebilt / Bluesea circuit breaker & fuse block with relays all wired up and installed. I have to wait until the bumpers are done to wire up the lights but at least it'll be a basic plug and play then.

    Big thanks to @GHOST SHIP , @nevadabugle and @paranoid56 for answering all my questions.

    image.jpg
    image.jpg

    image.jpg
    Ran the switch wires through into the cab alongside an existing black wire. I had to feed each wire individually and it wasn't easy. Then wrapped wires in split loom.
    image.jpg
    The switches
    image.jpg
     
    Last edited: Aug 16, 2016
    3d fj likes this.
  15. Aug 16, 2016 at 5:47 PM
    #235
    3d fj

    3d fj Member

    Joined:
    Apr 29, 2016
    Member:
    #185595
    Messages:
    18
    Gender:
    Male
    very cool.
     
    Toynado[OP] likes this.
  16. Aug 16, 2016 at 5:50 PM
    #236
    big_jarv

    big_jarv Well-Known Member

    Joined:
    Sep 21, 2015
    Member:
    #164805
    Messages:
    2,105
    Gender:
    Male
    Vehicle:
    2020 TRD Pro
    I like the tail gater repellent light :rofl:
     
    Toynado[QUOTED][OP] likes this.
  17. Sep 6, 2016 at 6:54 AM
    #237
    Toynado

    Toynado [OP] Well-Known Member

    Joined:
    Oct 16, 2015
    Member:
    #166816
    Messages:
    1,393
    Gender:
    Male
    SF Bay Area
    Vehicle:
    2016 TRD OR DCSB Quicksand
    EXTERIOR: Toytec Boss 2.0 Dakar CS047R Leaf Springs Tailpipe chopped Pelfreybilt Front full hoop front bumper w/ Pelfrey fairlead Pelfreybilt Rear standard bumper Pelfreybilt Aluminum IFS, Mid, Rear (exhaust reroute) & Gas tank skids Pelfreybilt Fuseplate w/ 12 circuit fuse block All-Pro Apex Sliders ProComp 7036 17"x9" -6 offset BFG 275/70R/17 KO2's Warn VR10000-S winch Baja Designs S8 light bar & Squadron sports amber pods in front bumper Baja Designs S2 flush pods in rear bumper Baja Designs Squadron Pro amber pods on Caliraised ditch light brackets @rrentrop reflective black tailgate inserts RSI LED's for regular & high beams Prinsu Cabrac Custom Tradesman Truck Top by Access Manufacturing w/ Powertank 8"propane tank mount & Yakima tracks on the roof INTERIOR: Warrior Products door sill protectors Husky Weather Beater floor mats front & rear Coverking arid multicam seat covers in the front Midland 75-822 CB w/ 4' Firestick antenna on C4 Fabrication tailgate mount Consolevault Hondo Garage iPhone mount
    I've had a few requests for a list of what I used for my fuse plate build so here it is:

    Circuit breaker:
    https://www.amazon.com/gp/product/B0053PGXQ2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

    Add-a-circuit:
    https://www.amazon.com/gp/product/B00SUTYYS2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

    4 gauge ring terminals (qty 2)
    https://www.amazon.com/gp/product/B0002YXQ2I/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

    Fuse block:
    https://www.amazon.com/gp/product/B001P6FTHC/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

    Relays:
    https://www.amazon.com/gp/product/B017VDI0GY/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

    4 gauge wire:
    https://www.amazon.com/gp/product/B007385TMQ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

    Circuit tester:
    https://www.amazon.com/gp/product/B000M5ZWBA/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

    The rest came from Auto Zone/ Radio Shack/ Home Depot:

    Misc color/size shrink wrap

    Split loom

    22-18 gauge ring terminals and female quick disconnects

    12-10 gauge ring terminals and female quick disconnects

    22-18 butt connectors

    12-10 butt connectors

    12 gauge wire for fuse block to relays & relays to accessories

    18 gauge wire for switches to relays

    M4 - 70x12 screws

    M4 - 70x20 screws

    M4 washers

    M4 nylon lock nuts

    M8 screws - (forget the length but you'll need two for attaching plate to truck)

    3 amp fuses for the switches and whatever amp fuses you'll need
     
    tacomarin and omaguz like this.
  18. Sep 14, 2016 at 1:30 PM
    #238
    Toynado

    Toynado [OP] Well-Known Member

    Joined:
    Oct 16, 2015
    Member:
    #166816
    Messages:
    1,393
    Gender:
    Male
    SF Bay Area
    Vehicle:
    2016 TRD OR DCSB Quicksand
    EXTERIOR: Toytec Boss 2.0 Dakar CS047R Leaf Springs Tailpipe chopped Pelfreybilt Front full hoop front bumper w/ Pelfrey fairlead Pelfreybilt Rear standard bumper Pelfreybilt Aluminum IFS, Mid, Rear (exhaust reroute) & Gas tank skids Pelfreybilt Fuseplate w/ 12 circuit fuse block All-Pro Apex Sliders ProComp 7036 17"x9" -6 offset BFG 275/70R/17 KO2's Warn VR10000-S winch Baja Designs S8 light bar & Squadron sports amber pods in front bumper Baja Designs S2 flush pods in rear bumper Baja Designs Squadron Pro amber pods on Caliraised ditch light brackets @rrentrop reflective black tailgate inserts RSI LED's for regular & high beams Prinsu Cabrac Custom Tradesman Truck Top by Access Manufacturing w/ Powertank 8"propane tank mount & Yakima tracks on the roof INTERIOR: Warrior Products door sill protectors Husky Weather Beater floor mats front & rear Coverking arid multicam seat covers in the front Midland 75-822 CB w/ 4' Firestick antenna on C4 Fabrication tailgate mount Consolevault Hondo Garage iPhone mount
    Went with a new switch.
    image.jpg image.jpg
     
  19. Oct 9, 2016 at 8:44 PM
    #239
    Toynado

    Toynado [OP] Well-Known Member

    Joined:
    Oct 16, 2015
    Member:
    #166816
    Messages:
    1,393
    Gender:
    Male
    SF Bay Area
    Vehicle:
    2016 TRD OR DCSB Quicksand
    EXTERIOR: Toytec Boss 2.0 Dakar CS047R Leaf Springs Tailpipe chopped Pelfreybilt Front full hoop front bumper w/ Pelfrey fairlead Pelfreybilt Rear standard bumper Pelfreybilt Aluminum IFS, Mid, Rear (exhaust reroute) & Gas tank skids Pelfreybilt Fuseplate w/ 12 circuit fuse block All-Pro Apex Sliders ProComp 7036 17"x9" -6 offset BFG 275/70R/17 KO2's Warn VR10000-S winch Baja Designs S8 light bar & Squadron sports amber pods in front bumper Baja Designs S2 flush pods in rear bumper Baja Designs Squadron Pro amber pods on Caliraised ditch light brackets @rrentrop reflective black tailgate inserts RSI LED's for regular & high beams Prinsu Cabrac Custom Tradesman Truck Top by Access Manufacturing w/ Powertank 8"propane tank mount & Yakima tracks on the roof INTERIOR: Warrior Products door sill protectors Husky Weather Beater floor mats front & rear Coverking arid multicam seat covers in the front Midland 75-822 CB w/ 4' Firestick antenna on C4 Fabrication tailgate mount Consolevault Hondo Garage iPhone mount
    @Pelfreybilt front bumper and IFS skid. There are no words to describe the thought that went into the design, quality and craftsmanship... Not to mention the best people ever!! image.jpg
     
  20. Oct 9, 2016 at 9:36 PM
    #240
    hirod

    hirod Well-Known Member

    Joined:
    Jun 3, 2013
    Member:
    #105540
    Messages:
    1,245
    Gender:
    Male
    hawaii
    Vehicle:
    16 double cab short bed OR
    did you install a winch?
     

Products Discussed in

To Top