Colorado B.S. Thread

Mod day! Sweet, I need and SAS and some dirtyfives. I'm sure that is only a day job.

 

Mine took 10 minutes.

 

I bet if any one could do it you could. Ill help you cut it all off!!!!

 

Where's a local(denver metro area) that I can grab all the relays, fuses, and wiring from? I remember you said you had some thick gauge wiring laying around, but I think ill need some smaller stuff too as to not be super overkill-ey

 

What all do you need? I go through del city or Amazon for all my electrical stuff unless you like paying more for things. And wire wise what gauge do you want. I got about all of it.

 

Anybody here in Fort Collins? Could really use some help with getting some wiring parts for my 4x4 conversion. Guy is parting a Tacoma on CL

 

You'll prob have the wiring that I don't have, I really just need some relays for the 12inch bar, 50inch bar and some fuses for everything on the blue sea

 

Wire *check*
Relays *should have (check)*
Fuses *check*

 

Do you know if there is anything special about the solar panel wiring? The controller to battery wires are too short, but they seem to have extra rubber on the outside of the wires. I looked on them for a gauge but it didn't say like a normal wire would.

 

Live a normal and peaceful life where there is no spelling errors and no reason to be on tw besides the romance between al and brandon.im sure most of you would be happy if i was not on here.

 

Nope as long as they are not sheathed diffrently they are a positive and negitive. You can Lengthen with bigger wire to try and reduce the current loss but remember your smallest wire is your choke point. The larger wire only its to lesson the resistance.

 

They seem to be flowing those electrons quite well, so no worries there. I only need 2-3 feet extra of course. But I'm not going to mess with it until I redo the water/fridge area.

 

Have you thought about doing an on board water heater yet? Im slowly amassing parts for it and was wondering if you have thought about it.

 

I've thought about it, but thats as far as I got. I'll get the new tank and redo all that stuff first, along with the OBA and tanks, then I'll look into it.

I am still trying to decide how I want to do the water distribution block area. Right now it works, but it could be better. If I could block off the window, I could have the water there on one side, accessed from the outside, along with a filler neck.

 

Well hopefully i will have it done by then then. I need to get the alcans first. Then hot water. Or else i will be in hot water.

 

Check out the summer highlight, then join the new club, ya nerds!

https://www.youtube.com/watch?v=EYnWywEtFbA

 

These things were like 5 bucks in Korea haha

 

WTF 4 pages last night.