access behind dash for switch install

I am a little stumped as to how to access behind the center row of switches (where the wireless charging switch is). I am trying to install my light bar switch and want to route the cables, but its proving a bit tricky to pull the trim apart.

how much do I need to pull off to get access back there?

 

Never mind! found a post in 2nd gen that gave me the idea to fish the wires through. worked like a charm......although if someone has a good idea on easy ways to tap into power for the switch's accent light, that would be appreciated!

 

Post a link to the thread that helped you !

 

Here is the post. it only helped in the sense that someone mentioned to just fish a line through. I took the blank out, and gently pushed a coat hanger though, reached up and grabbed it under the glove box. Of course, that only helped get the wires to the blank without having to remove anything. now I am left with the fact that I still need access to the wires in the dash so I can tap into power. I am wondering if I can tap into the power of the wireless charging switch?

https://www.tacomaworld.com/threads/how-do-you-get-to-center-switches.445688/#post-13007537

 

pull the trim pieces off around the radio and remove radio to gain access to switches.