how too make the new pro level

since they only raised the front 1 inch on the 17 pro, the front sets 3/4 in lower than the rear,, my 15 pro had a 1.75 front lift and sat level,,,

 

Top plate spacer

 

Not a fan of spacers, but thats the 1st thing i thought of... a small 1/2" top plate should get u close to level and not effect much else.

 

Big difference in a top plate spacer and the 3" spacers people use to lift their trucks. There is no other option if the OP wants to keep stock springs and struts

 

Agreed.

 

3/8" spacer. IE 1/2 the difference in the front rear measurement.

Or you could leave the engineered rake in place. It is there for a reason.

 

The third gen Tacomas are one inch taller in front than the second gens, so the third gen Pros are pretty close to the same height up front as the second gen Pros. You should be damn near level.

 

Me too.

 

Put a couple of sandbags in the bed.

 

Too bad the Fox fronts weren't a coilover, and you could adjust it how you want.

 

OP

Do you have a pic of your truck sitting on level ground ?

 

You mean that they weren't an adjustable coilover, right? Like with a threaded shock body?

'Cause it is a coil-over-shock setup already.

 

Get out of my head

 

Buy a $3000 Snugtop with color match paint and all the bells and whistles, done.

 

durr.. ya I left out "adjustable". Threaded bodies

 

Maybe the front is lower cause once you load some gear in the bed, it sits more level rather than sagging.

 

Truck status

 

Here's another way to do it, but it might damage the paint