6 speed manual clutch

I am thinking about 2 truck and one is a 11 trd offroad 6 speed manual. My question is when I drove it the clutch was pretty stiff are they all like that or could it have have a different one installed. I have never driven a manual in a Tacoma.

 

https://www.tacomaworld.com/threads...on-your-6-speed-transmission-write-up.452553/

 

I don't find my clutch stiff, but it does have (what I consider to be) a high grab point.

 

O OK I drove it today and it grabbed right at the top

 

Same here, mine catches damn near at the top of the pedal travel.

 

Strange, none of the 2nd gen manual trucks I drove had what I would describe as a heavy or high grabbing clutch.

 

My old 08 was damn near perfect, it caught right in the middle.

 

My 2011 catches in the middle. I don't find it to be "heavy", but it's not feather light either.
OP-How many miles are on the truck you are looking to buy?

 

Thought I was the only one with the high catch point.

 

Mine had a high catch point. The clutch piston rod that attaches to the pedal is adjustable. Two turns to shorten the piston rod got the catch point much lower to the floor. Just don't adjust it too low.