Blower motor wires fail

Well it finally happened to me the blower motor for my air conditioner has burned up the wires . i'll be looking for two part numbers if anyone can help me. The part number for the resistor plug and the part number for the 12 V power to the blow motor

 

Plug Number

$32 82141-04M40

82141-04M40
Resistor Number 87138-04052

 

Excellent. Would you happen to have the part number for the 12 V power to the motor. That connector is also burned. It is the connector in 1st photo.

 

Sorry, but that I do not have. If I come across something I will send you a PM and update this thread.

Updated Information:

I found this information:

Part number

$13 90980-10916 6" 12ga Harness NEW

90980-10916 Connector

Part Number

$11 82998-12380 90980-10916, 6"es 12 Gauge Wire Harness

82998-12380 Wire and terminal

Not sold as a kit, sold as each.

Connector:




Terminal:

 

So have you tried some spray electrical cleaner and a fine wire to clean the burned tab off? Bend the male pin slightly toward the female connector to get a harder connection. (Sounds dirty don't it) Press dielectric grease into the tab and on the pin to stop the arcing. This worked for me and it's ran like a champ ever since. Pretty much a quick and free fix.

 

Would di-electric greese on the new connector help it last longer?

 

That isn't what Dielectric Grease is for.

Dielectric Grease is a non conductor and is for preventing moisture or water into a connection. It does not improve a connection, just the opposite.

 

Thanks for the fast response on the part numbers it's much appreciated. It will take a couple of days for them to arrive too bad it's so hot In the oc this week

 

Just glad I could help.