what does a spindle lift do?

so i found that the spindle lift i had posted is for "5 lug" will it fit on my prerunner? (6lug)??

 

I very highly doubt it.

 

hey if i were to get spindles would that mean i would have to run 17" rims or bigger? or am i good with 16s

 

TC spindles give 3.5 inches not 4 inches. And as far as the benefits of spindles, the extra lift is the least impressive thing about them. You can get spacers and body lifts, just for lifts. The way the spindles keep the stock geometry and suspension travel are the biggies. With spindles you get the ability to have more travel than with any brand of coil, spacer, coil-over or adjustable shock lift alone. Especially when you pair up the spindle with some nice coilovers and uca's. Long travel is the next step up from spindles. And if you have a 4X4 none of the spindle ideaology matters anyways.

 

I believe the Camburg spindles are 4" of lift.

 

okay so im seeing alot of TC and Camburg spindles, but you guys all have 2nd Gens..

any available for 1st Generations?!

 

You are correct.

 

ok so i get the tc spindles and get 3.5 inches of lift, now will that off set my 3 inch coil over or add to it?

 

Are your coilovers adjustable? The lift from the coilovers is in addition to the spindle lift. My front set-up, for example, can be at 3.5"-7" inches and everything in between by adjusting the coilovers. So unless you want 6"+ of lift up front you will need adjustable coilovers if you run the spindles. I hope that makes sense

 

yes toytec adjustable coils, do u like your set up and how it rides, are u a 4x4

 

4x4's cannot use the spindle lift from TC or Camburg. And no I am 2wd.

I like my setup much more now than when I had OME coils and Toytec spacers.

 

how much lift do u have in the back? and what do u have back there, sry for all the questions just trying to think things out

 

2.75 inches in the rear. LOOK at my signature. It lists all my suspension mods.
VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV

 

So can you spindle lift a 4wd? And what size does she have on hers?

 

you cannot use a spindle lift on 4WD. 2WD only

 

New to forums and been hanging around reading threads pertaining to issues that I have with my ride. I am blown away with the info. Good job everyone! I just picked up my 2005 and was trying to level up the front because it is too low compared to back. I carry some payload sometimes as far as tools for construction and materials. But will spindles keep my ride when lifting compared to say a set of 5100's around or coiloverz. This off-road suspension thing is kinda involved as far as set up. Thanks for any help