What Have You Done To Your 2nd Gen Tacoma Today?

Have you checked if the bulb is single filament? I'm not sure of it works like this on out trucks but on older cars to bypass my dtrl that were my turn signal/dtrl I used single rather than dual filament.

 

Whats the minimum backspace were can have

 

Well then I won't complain about getting around 320 miles out of a tank with slightly larger tires, a shell, stuff in the back, rear steel bumper, sliders and a winch mount and winch in the front with a moderate lift in the front and the back.

 

Added New 265/75/16 Falken Wild Peak AT3W's On 3RD Gen 4Runner Wheels. Also my Mobtown tail gate skin and GTek Fab sill protectors arrived.

 

I can see that thing getting caught on everything when you're wheeling it, especially if you can't get at the obstacle at an angle.

 

Fuelly. Great little free app that lets you track gas mileage, maintenance and pretty much everything else. You can also set reminders for stuff like checking the cabin air filter and other stuff I tend to space off.

 

Hey i get the same milage. You should just throw on a 3 in lift with 275/70/17. I mean you have nothing to lose..

 

A little gift from the wife.

 

No one has any input on the minimum backspacing required to clear stuff, these rims im eyeballing have 4 inch backspacing

 

Well fudge..

 

Maybe the parking brake needs to be engaged?

 

Try searching or posting to the correct subforum

 

I'm at 4.5" without problem.

 

What size tires? 4.5 or less is ideal for 285. Im running 275 with 4.75, 3 inch lift no issues

 

Did try searching. Found a educational thread by tcbob that didnt say if 4 was good or bad

 

265 75 16

 

I used this pin switch:

$10 Heavy-duty Adjustable Pinswitch, Standard Packaging

https://www.amazon.com/dp/B0009SXOVA

I used these diodes:
https://www.amazon.com/dp/B00NQ36SCM

I used this wire (you can use any 16 gauge wire that you want but this is what I have. I'm always doing electrical stuff so I buy the big rolls):

$76 Install Bay PWBL16500 Primary Wire 16 Gauge - Blue (500 Feet)

https://www.amazon.com/dp/B000GB0D4Q

Take a look at the install manual for the bed lights:
https://cdn.shopify.com/s/files/1/0...8_TA_TOYOTA_MCDONOUGH.pdf?6492033332345436988

The way I wired mine, the dome light will activate the bed lights, the pin switch will activate the bed lights but the pin switch will not activate the dome lights inside. Here is a pic of the way I did it:

 

4 inch is plenty fine for 265s

 

By gosh by golly i may have new rims installed along with my 3 inch lift soon here then lol, new look here i come.