Cheap Bumpers on eBay!!

whoa there don't be concerning yourself with the length of my bus, ya perv.

 

i mighta trolled ya... my bad... but I have to know... what's the frame brace like on that bumper?

 

It mounts to the 6 studs 3 on each side. No crumple zones like the ARB

And the lower brace mounts to the bumper and then the bolts where the Sway bar mounts.

 

because the ARB is the beacon of strength in the bumper world

You would greatly benefit from some frame braces no matter what bumper you run. Any reputable manufacturer would tell you this, but ebay is a mysterious place.

 

what's a wench plate?















I think you're John and you're back to promote your chinacrap steel bumper

 

and everyone knows all the cool kids don't run front bumpers in the first place.

 

hey broseph @TexasInfidel, I gotta make sure you know... if you pull the 12,500 lb as rated on your "wench plate" ... you know your winch will tear the dinky studs of your bumper and come right off of your frame right? Why? No frame braces. Why no frame braces? Ebay. Getchu some frame braces and pull your wench plate as hard as your heart desires. I don't think they sell those on ebay though, but I could be wrong. Search for "wench plate frame brace" and see what comes up.

 

I found your 12500lb wench.

 

Does it work with a tow hitch underneath?

 

Obvious troll is obvious. Get outta here, COLE!

 

Yes you must brace,good install shops offer it for next to nothing
You can have a bumper or a battering ram,most just have bump-r's

 

So what kind of deal is he offering for just the front?

 

http://www.ebay.com/itm/Toyota-Taco...s-Winch-Ready-LED-Offroad-Steel-/222154548925

??

 

$598 for the front + $519 for the rear is $1117 and TexasInfadel had stated they wouldn't be offered on Ebay. At the time he said that there was 0 available on the Ebay listing. I didn't check back, but thanks for that.

 

That's just same link from page one.

 

The factory hitch will not work. The Allpro high clearance hitch does, i have one. Ive used it many times with no issues.

 

You have to call John to access these bumpers
After 9am west coast

 

So, if you take a product that is made by a company and then start making an identical product yourself without the labeling, doesn't that make it a COPY?

 

Thats exactly what it is. In order for it to be merely an unlabeled version of an ARB it would have to me made by the same manufacturer as the ARB.