Install 2015 Entune (non JBL/non nav) in 2012

That is correct.
It will look identical to the product that you linked with the bare end as shown.

 

The USB from our stock radios is located behind the glove box on the passenger side kick panel. It is the Brown connection in this photo:


You will need the AXXESS

$9 AX-TOYUSB - USB-Auxilliary Retention Harness - USB adaptor to retain the OE USB in select Toyota vehicles

AX-TOYUSB Female cable and the AXXESS

$14 AX-TOYUSB-2 2010-Up Toyota USB Adaptor

AX-TOYUSB-2 Male cable to make it work. Should be around $20.00 or so.

Plug the AXXESS AX-TOYUSB-2 Male (with the brown end) into the brown corresponding connection that you will unplug from the box (part of the "entertainment system").


Plug them together and then plug the rest together to the radio.

I'll work on the camera in the display tomorrow.

Eric

 

OMFG.... Yet another adaptor to buy. Anyone interested in a 2015 Entune HU? This is for sure a major FPITA....

 

damn man sil havin problems.
im bout to buy a 2015 unit for my 2010.
i really want one with nav non jbl but i cant find one anywheres

 

So I bit the bullet, so to speak and shelled out the $60 for the XM cable lead/adaptor. The female end of the adaptor didn't fit the Toyota male end as I would have liked so I had a hard decision to make, start chopping up the brand new $60 adaptor jack, or send it back and start dumping my Entune goodies and just forget the idea of ever installing it in my 2012...

I opted to 'hack the jack' and see if it gave me XM signal... I'm happy to report that it has and I now have the radio in my truck with the phone, steering wheel controls, 3.5mm input, XM radio and AM/FM functioning.

I still have the following issues that I want to resolve:

-USB jack not connected to the Entune,
-no Bluetooth output via Spotify or Pandora from my iPhone,
-back-up camera display on radio vs rearview mirror.

I know I have another jack I have to buy and some re-wiring I have to do for the backup camera...

What I don't know is if the USB and Bluetooth issues are related or not. I don't have a lear understanding of what I need to get the USB connected. I Goggled the adaptors referenced and can't figure it out, so any additional help there would be appreciated.

Also any help on the whole Bluetooth sound not working would be much appreciated.

 

for the back up cam you can call camera source and they an sell you the kit for the 2015 radio.
its $80

i debated it but thsts alot of cash to throw to move the cam to radio

 

I have "half" of the camera relocate kit. I bought the part from CameraSource for the 2013 relocate. The plug on the radio end of that unit isn't compatible with the 2015 HU as they changed to a 40 pin unit in 2014 (I think). So I have to adapt a different plug (also from Camera Source) to covert the HU plug to a 40 plug.

I'm still trying to get Bluetooth playback audio through the unit. I think it has something to do with the multimedia playback module located behind the glovebox.

 

ah yeha i know they said theyd sell me the whole kit.

i havent even installed my radio yet, its still sitting in my backseat,havent had the time to install/im being very lazy

 

just hooked mine up.
pandora and spotify work flawless over bluetooth and when my phone is plugged in via the iphone cord

 

I'm starting to come to the conclusion I have a bad HU.... Ain't that a b$%#@!

 

yeah man. when i plug my phone in and select usb i think it is i can play pandora spotify that way.
or i can do it via bluetooth, works flawless.
i love the radio sounds much better than stock too

 

So you bought and installed the USB adaptors too?

 

i bought this

 

And plugged it into your radio? And plugged that into your factory USB port?

 

plugged it into my radio yes, and than i just plugged my iphone cable into that.
my 2010 didnt come with a factory usb port

 

Which port does it plug into on the back of the radio? If you don't mind me asking

 

the gray one

 

Awesome. Thanks. What year radio is that?

 

no problem, and 2015. i wanted to do the usb port in the dash so it would look factory but when i got the truck i had the blank switch next to the aux port so i put a usb port which is simply for charging and i needed to cut the switch opening a little bit bigger for it to fit. so i dont think a new usb switch would fit tight in there.
so i just plugged my iphone cord into the end of that plug i showed you and routed it theu the dash to cone out in the cupholder area

 

I had no problems installing a 2014 HU Nav/Entune into a 2012.

https://www.tacomaworld.com/threads...tion-retrofit-diy-w-info-part-numbers.318616/