1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Bench to bucket seat connections

Discussion in '2nd Gen. Tacomas (2005-2015)' started by DEN63, Oct 21, 2016.

  1. Oct 21, 2016 at 7:12 PM
    #1
    DEN63

    DEN63 [OP] Member

    Joined:
    Aug 23, 2016
    Member:
    #195362
    Messages:
    9
    I am in the process of doing a bench to bucket seat conversion on my 09 single cab. I bought seats out of a 2011 extended cab. I was checking the connectors first before I pull the seat out. The driver side is all good. My question is on the passenger side. I have enclosed pictures of my main harness, and picture of under the passenger seat. Do I unplug from the module there, and plug my main harness in to that? Also, what is the six prong plug for? I don't want to assume this is what I need to do, I don't want to zap any electronics of set off the airbag. Any info or help in this is appreciated

    IMG_20161021_202903734.jpg
    IMG_20161021_202903734.jpg
    IMG_20161021_203354065.jpg
     
    Last edited: Oct 22, 2016

Products Discussed in

To Top