The 2.7L Single Cab Thread

Anyone on here running one inch wheel spacers?

 

1.25" here

 

Hey there... here is my 2008. Really getting inspired by the regular cab megathread here. Loving the truck, only had it for about 6 months. Plans include a sliding rear window, tint, darker wheels and maybe an exhaust. Nothing major. Loving the forum so far! Thanks all.

 

That's what everyone says lol.

Nice truck! Cool color too - pretty rare from what I've seen.

 

speaking of rare colors. I've seen 2 maroon single cabs in the last week! what a nice color man i wish mine was maroon

 

Have you had any issues?

 

No issues - I spoke with the owner of BORA and he said no locktite, check after 5 miles to make sure everything was installed correctly. No issues with bad bearings, alignment, torque, etc. after 25k miles and I bought mine 3rd hand.

Here's the word for word email conversation we had:

https://www.tacomaworld.com/threads/all-pro-1-5-in-wheel-spacers.394852/#post-10919455

 

Been lurking for a while, and have used the search bar, tough to find straight answer.
'05 4X4 with
Toytech Ultimate lift
1 " body lift
16 " Worx wheels
Spidertracs spacers
Will 285 75 16 fit without rubbing or require cutting?

 

I would say they would. You look like you have tons of room.

BUT..

If this helps any I have ~3 inch lift and 285/70r17 and put 2 inch spacers on the front to see how bad it would rub and it wasn't to major. They would've fit if I did the cab mount chop and trimmed the front bumper a tad and the rear of the front fender flare.

 

Most likely no cutting. If cutting is required it will be minimal and it wont be difficult (probably the inner liner). You can use a pocket knife for the inner liner. If you don't offroad, I doubt you will rub very often.

 

Getting flexy at work

 

Where did you get your rack at ? And is it removable without leaving holes?

 

@4bangeryota its a Thule rack and yes it's removable. Just 2 tracks remain on top after you unlatch the rack and you can slide the racks forward and backwards as needed.

 

Thanks! I'm definitely interested in a rack now since they can be removed

 

Soon

 

@stlntaco what type of taillights are those?

 

Somethin like these..............

http://www.ebay.com/itm/2005-2015-Toyota-Tacoma-Black-LED-Tail-Lights-Lamps-/301952392100?fits=Model:Tacoma&hash=item464dc3dba4:g:MskAAOSwhRxXKsXm&vxp=mtr

I have the chrome version since the black ones weren't out yet and besides that, my truck is SR5 so I have mix of chrome/black..........

 

They are Depo, black housings, clear lense.