XD wheel fitting question

I know wheel fitment question are beat to death but I couldn't find anything regarding my situation exactly. I have an 03 Tacoma 4WD and am ALMOST ready to click "buy" on these wheels. Am I missing anything? Is the offset and everything good? I don't want them to stick out of my wheel wells or anything crazy. Just want a nice, stock fit with a better look than my steelies. Any reason why they wouldn't work or am I good to go? Thx guys

http://cgi.ebay.com/ebaymotors/ws/e...873478&ssPageName=STRK:MEWAX:IT#ht_3207wt_876

 

Welcome to TW.

I have a 2nd gen and this is my observation. The 4.5" BS, which is less than the stock 5.5") will move the tires outside a little bit but the tires won't stick too much even with a 285 width tires. The tires will rub the wheel wells when turned fully locked. This is remedied with a small lift (2").

Do some search and check out the 1st gen build section as some maybe running these wheels. I hope someone with 1st gen will shed light to your questions.

 

I forgot to mention I do have a 2" lift=) So basically the wheel will be 1" further out than the stock rim, correct? That's acceptable... I'm getting 275/70/16 tires so fitment should be pretty close to perfect. I've done a lot of research but just wanted a thumbs up from someone that's actually had real world experience. E shopping doesn't always turn out well in the real world:/