Different Wheel Setups on Stock Suspension

Post your wheel/ tire setups on stock suspension! For those like myself looking to get a new setup while putting off buying a suspension lift system in the farther future. For example: has anyone put 275s on an 18 inch wheel with 0 offset and 4.5" backspacing without rubbing?

 

Welcome to tacomaworld.
Searching through this site, you'll find most all the info you'll ever need.

 

http://www.tacomaworld.com/forum/wheels-tires/190210-pics-aftermarket-rims-stock-suspension.html

 

I had my procomps on before I did my suspension. They have 265-75-16 tires on them and the wheels have 0 offset. Because they have 0 offset the tires would rub when turning. I took them off until I installed my lift and then put the wheels back on.

 

Thanks ChemDawg! Thanks for the link. If you don't mind me asking, what's your wheel/ tire setup? I'm asking because I dig your avatar pic

 

Wow! So going from 265-70-16 (My stock wheel at least) to 265-75-16 and you were rubbing? Definitely will take that into consideration...

 

Yeah, they rubbed because of the 0 offset. On a factory wheel those tires would fit fine.

 

Do you know what the backspacing is on your wheel? Because a stock wheel I thought a 0 offset.

 

Stock wheels have about + 27 to 30mm offset.

 

Stock off-road and sport are +30mm and +32mm offset. I just checked.

 

The less offset a wheel has the more it sticks out away from the frame. Another words less offset is like having a wheel spacer.

 

Thanks for the info! By the way, love the look of your truck! Clean and simple yet subtly aggressive.

 

255 70 17 bs I think 4.5..
general grabber at2s on xd hoss