C4 Fab lopro bumper light question

Looking at this for my truck and it has a cutout for a Baja 20" light and says they can't guarantee it will fit with other manufacturers.

Anybody have one that can give some insight to what kind of light fits in there? Don't want to have to get a baja if something like cali raised will work

 

@C4 Fabrication

 

I believe any 20" will fit the housing, its where the mounting points are that could cause issues. I'd suggest getting the dimensions from C4 and the go from there. May be cheaper to get a less expensive bar and modify the mounting points at a local shop if that's feasible

 

Gotcha....looking for anyone that has one that can give some insight. Do the Baja lights have some type of proprietary mounting?

 

Here are the dimensions of the S8 lights we use. We use the 20" light so we set our mounting tabs at about 20 3/8" to the center of the slotted holes to fit dimension "D". The tabs are set at 1 1/2" down from the center of the light cutout so that the light sits at the proper height to be centered in the cutout when its bolted in place. Hopefully this info can help you find another light that may work for you.

Also we could build the bumper with not light tabs and you could take it to a local shop to have them add the tabs for whichever light you want to use.

 

Thanks for the info!

 

@CaliRaisedLed Do these dimensions sync up with one of your offerings?

 

No problem!