OBA -> On Board Air Mega Thread & BS

Crom · Oct 31, 2016

@Sandman614
@ramonortiz55

BSP 1/8" is correct.

Details in my build thread.

Sandman614 · Oct 31, 2016

Crom said: ↑

@Sandman614
@ramonortiz55

BSP 1/8" is correct.

Details in my build thread.
Click to expand...

looks awesome!

CaptainReverso · Oct 31, 2016

Hey guys I am selling an ARB TWIN AIR COMPRESSOR 24VOLT

$625 CKMTA24 Twin Air Compressor Kit On-Board 24V Incl. Fully Assem Air Comp Complete Wiring Loom Comp Isolating Switch Splash Resistant Air Filters Mounting Bolts/Washers Twin Air Compressor Kit

CKMTA24 it is new but was sent to me with very minor cosmetic scratches. So the company sent me a new one and got a deal on this. But I do not need it. It is a complete compressor. Wiring , air filter, switch ECT. Just no original box. Looking for $380 shipped on your dime

Crom · Oct 31, 2016

Sandman614 said: ↑

looks awesome!
Click to expand...

Thanks. I'm really happy with it now.

WhiteNight · Nov 4, 2016

CaptainReverso said: ↑

Hey guys I am selling an ARB TWIN AIR COMPRESSOR 24VOLT

$625 CKMTA24 Twin Air Compressor Kit On-Board 24V Incl. Fully Assem Air Comp Complete Wiring Loom Comp Isolating Switch Splash Resistant Air Filters Mounting Bolts/Washers Twin Air Compressor Kit

CKMTA24 it is new but was sent to me with very minor cosmetic scratches. So the company sent me a new one and got a deal on this. But I do not need it. It is a complete compressor. Wiring , air filter, switch ECT. Just no original box. Looking for $380 shipped on your dime
Click to expand...

Hmmm pictures

CaptainReverso · Nov 4, 2016

WhiteNight said: ↑

Hmmm pictures
Click to expand...

Crom · Nov 5, 2016

CaptainReverso said: ↑

Click to expand...

Put it on eBay. Nobody here has 24V to feed that.

Stickerice85 · Nov 5, 2016

inv3ctiv3 said: ↑

Figured I'd do a little write-up on my OBA set up that I put in this weekend, hopefully it comes in handy for someone. A lot of this was already covered in @Crom thread which I'm sure everyone has already seen and I won't be going over my aux battery set up that's a whole separate thing.

Parts list:

$611 ARB CKMTA12 '12V' On-Board Twin High Performance Air Compressor, Ideal for Air Lockers Locking Differentials, Tire Inflator, Air Horn, Air Tools and Pneumatic Tools.

ARB Twin Compressor

$48 ARB ARB605A Tire Pressure Monitor Inflator and Deflator with Analog Gauge and Flexible Hose in Blue

ARB Air Chuck

$19 Flexzilla Air Hose, 1/4 in. x 25 ft., 1/4 in. MNPT Fittings, Heavy Duty, Lightweight, Hybrid, ZillaGreen - HFZ1425YW2

Flexzilla 1/4" x 25' Air Hose (I used this as the fill up line connected to the air chuck)

$24 Flexzilla Air Hose, 3/8 in. x 25 ft., 1/4 in. MNPT Fittings, Heavy Duty, Lightweight, Hybrid, ZillaGreen - HFZ3825YW2

Flexzilla 3/8" x 25' Air Hose (I used this one to go from the braided line to the bumper)

$60 EWCS 4 Gauge Premium Extra Flexible Welding Cable 600 Volt - Black - 25 Feet - Made in The USA

4AWG Welding Cable (I ran this from the starting battery to the bed for power)

$16 Pico 4236C 4 AWG Battery Cable 1/4" Tubular Lug Ring/Eye Terminals 15 Per Package

4AWG 1/4" Lug

$7 Anderson Metals - 57002-0604 Brass Hose Fitting, Connector, 3/8" Barb x 1/4" Female Pipe

1/4" FPT to 3/8" Barb (Braided line to 3/8" hose running to bumper)

$34 Parker - 4-4 SE-B Brass Pipe Fitting, 90 Degree Street Elbow, 1/4" NPT Male X 1/4" NPT Female

90 Degree Elbow (from compressor to braided line)

$15 NTE Electronics WH18-00-25 Hook Up Wire, Stranded, Type 18 Gauge, 25' Length, Black

18AWG Wire (used to run from the bed to the switch and switch to battery)

$24 Viair 92804 18" Stainless Steel Braided Leader Hose without Check Valve

Viar 18" Steel Braided Line

$7 Milton Industries S-761 1/4" FNPT HIGHFLOWPRO V-Style/European Interchange Brass Air Plug Fitting (High Volume Low Pressure Application), Pack of 2

1/4" FPT V-style Plug

$11 Milton S-764 1/4" FNPT HIGHFLOWPRO V-Style/European Interchange Air Coupler Fitting (High Volume Low Pressure Application)

1/4" FPT Quick Disconnect (you'll need two of these, one for bumper and one for hose)
Two way switch (this is up to you, depends on what style you want and where you put it)

Now there are some items I used like bolts, screws, wiring, etc that you won't need if you're not mounting it the way I did but you'll need basic tools, good drill bits, solder, shrink wrap, zip ties, different gauge wiring, pipe tape, etc.

So I don't have a lot of photos of wiring it up but it should be pretty straight forward, you take the big power harness that has the two big fuses and run those wires together into the 4AWG wire and route that to the starting battery, then take the black wires and run those together into another section of 4AWG wire and ground it to whatever you can that's closest to the compressor. Next up cut the connector off the other ARB harness and there is one purple (power) wire and one black (ground wire). I ran the ground into the other grounds to the 4AWG ground and then ran the purple wire to the cab for one side of the switch using 18AWG wire and then the other side of the switch got ran through the firewall to the starting battery, it's super simple. I didn't use ARB's switch even thought I wanted to, it's just too big and didn't fit anywhere so I went to radioshack and bought a switch that would fit on one of the blanks below the climate control:

I drilled a hole into the blank and then hot glued around behind the switch in the blank so it would be clean and not have glue everywhere:

I gently pried the blank out with a small flathead making sure not to eat up the dash, you could also drill a small hole and pull it out if you want, I used an old clothes hanger straightened out to run the 18AWG wire from along the drivers doorsill and over the pedals and through the opening.

Quickly soldered up the switch with one wire running to the starting battery and one running back to the switch and viola!

I mounted the compressor using the compressor mounts stock holes, just took the mount off the compressor and held it up to the tool box, marked the holes and drilled them making sure everything was straight and would clear. I also drilled a few vent holes just under the lip of the lid of the toolbox so it would get air and ventilation because these do get very hot.

Now my toolbox is mounted to the composite bed so I did have to drill another hole for the braided line and made sure it would clear that black box that's below the bed and above the axle/gas tank area so the hose wouldn't be crimped or at a funny angle.

Used the barbed fitting for this:

Ran it along the frame rail:

The zip ties are temporary I'll be using big hose clamps or something else to secure the hose to the hitch:

I also had to drill a hole in my @Pelfreybilt HC rear bumper for the quick disconnect:

And here you go, just get a little chair stopper to cover the QD and you're good to go!

I hope this helped and if anyone has any specific questions just PM me.
Click to expand...

As per the ARB install instructions for the twin compressor........the Red/Yellow wire to "ignition" and Blue/White wire to "dash illumination". If you did that, where is the "ignition" and "dash illumination" wires located at?

G.T. · Nov 5, 2016

CaptainReverso said: ↑

Click to expand...

Forwarding to a Land Cruiser buddy, his is 24v like mine.

Sandman614 · Nov 6, 2016

CaptainReverso said: ↑

Click to expand...

@JimboAnz for Josh
@nastyneight for Jason

*both have diesel conversions running 24v

sasquatch95 · Nov 7, 2016

Hey everyone. What is the best tire inflator with gauge?

Sandman614 · Nov 7, 2016

sasquatch95 said: ↑

Hey everyone. What is the best tire inflator with gauge?
Click to expand...

@Crom

Crom · Nov 7, 2016

sasquatch95 said: ↑

Hey everyone. What is the best tire inflator with gauge?
Click to expand...

Best is relative.

I'm using the ARB. It's good value for $30. Probably better for more $$$, but I'm happy.

sasquatch95 · Nov 7, 2016

Crom said: ↑

Best is relative.

I'm using the ARB. It's good value for $30. Probably better for more $$$, but I'm happy.
Click to expand...

I do like what you did with arb one you posted! I might follow your write up on that if I get the arb one

Crom · Nov 7, 2016

sasquatch95 said: ↑

I do like what you did with arb one you posted! I might follow your write up on that if I get the arb one
Click to expand...

The extra length is nice.

I haven't posted about this yet, but the new clip on tire chuck, I'll will swap for another one. I'm not happy with it, despite its better components over ARB. Maybe I'll never find perfection, but I'm gonna try, lol

sasquatch95 · Nov 7, 2016

Crom said: ↑

The extra length is nice.

I haven't posted about this yet, but the new clip on tire chuck, I'll will swap for another one. I'm not happy with it, despite its better components over ARB. Maybe I'll never find perfection, but I'm gonna try, lol
Click to expand...

Well I probably go arb then and just wait till you have perfected it then do that to mine

Sandman614 · Nov 7, 2016

sasquatch95 said: ↑

Well I probably go arb then and just wait till you have perfected it then do that to mine
Click to expand...

I use this one and have been happy with it.
*closed-system
Coilhose Pneumatics CH15 Closed Lock-On Chuck, 1/4-Inch FPT

$16 Coilhose Pneumatics CH15 Closed Lock-On Chuck, 1/4" FPT

https://www.amazon.com/dp/B008PZ7LMW/ref=cm_sw_r_cp_apa_cTtiybQBVM5PR

Crom · Nov 7, 2016

Sandman614 said: ↑

I use this one and have been happy with it.
*closed-system

$16 Coilhose Pneumatics CH15 Closed Lock-On Chuck, 1/4" FPT

Coilhose Pneumatics CH15 Closed Lock-On Chuck, 1/4-Inch FPT

$16 Coilhose Pneumatics CH15 Closed Lock-On Chuck, 1/4" FPT

https://www.amazon.com/dp/B008PZ7LMW/ref=cm_sw_r_cp_apa_cTtiybQBVM5PR
Click to expand...

Awesome! I wanted to try this one next. Ordered. Thanks!

G.T. · Nov 8, 2016

sasquatch95 said: ↑

Hey everyone. What is the best tire inflator with gauge?
Click to expand...

I'm very happy with the inflator I got from Powertank. I got the 60psi model with the clip-on chuck because I have no tires that I ever fill over 40psi. The only fault i have found with it is that it won't properly attach to the valve stems on my wife's factory 4Runner Trail Premium wheels.

sasquatch95 · Nov 8, 2016

G.T. said: ↑

I'm very happy with the inflator I got from Powertank. I got the 60psi model with the clip-on chuck because I have no tires that I ever fill over 40psi. The only fault i have found with it is that it won't properly attach to the valve stems on my wife's factory 4Runner Trail Premium wheels.
Click to expand...

That ones a little expensive but it does look very well built! So many options to choose from

Log in or Sign up

Welcome to Tacoma World!

OBA -> On Board Air Mega Thread & BS

#981
Crom Super-Deluxe Member

#982
Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

#983
CaptainReverso Well-Known Member

#984
Crom Super-Deluxe Member

#985
WhiteNight Well-Known Member

#986
CaptainReverso Well-Known Member

#987
Crom Super-Deluxe Member

#988
Stickerice85 Well-Known Member

#989
G.T. Official TW Burrito Inspector

#990
Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

#991
sasquatch95 Well-Known Member

#992
Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

#993
Crom Super-Deluxe Member

#994
sasquatch95 Well-Known Member

#995
Crom Super-Deluxe Member

#996
sasquatch95 Well-Known Member

#997
Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

#998
Crom Super-Deluxe Member

#999
G.T. Official TW Burrito Inspector

#1000
sasquatch95 Well-Known Member

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

OBA -> On Board Air Mega Thread & BS

#981 Crom Super-Deluxe Member

#982 Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

#983 CaptainReverso Well-Known Member

#984 Crom Super-Deluxe Member

#985 WhiteNight Well-Known Member

#986 CaptainReverso Well-Known Member

#987 Crom Super-Deluxe Member

#988 Stickerice85 Well-Known Member

#989 G.T. Official TW Burrito Inspector

#990 Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

#991 sasquatch95 Well-Known Member

#992 Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

#993 Crom Super-Deluxe Member

#994 sasquatch95 Well-Known Member

#995 Crom Super-Deluxe Member

#996 sasquatch95 Well-Known Member

#997 Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

#998 Crom Super-Deluxe Member

#999 G.T. Official TW Burrito Inspector

#1000 sasquatch95 Well-Known Member

Products Discussed in Entire Site Forum: Technical Chat Thread: OBA -> On Board Air Mega Thread & BS

#981
Crom Super-Deluxe Member

#982
Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

#983
CaptainReverso Well-Known Member

#984
Crom Super-Deluxe Member

#985
WhiteNight Well-Known Member

#986
CaptainReverso Well-Known Member

#987
Crom Super-Deluxe Member

#988
Stickerice85 Well-Known Member

#989
G.T. Official TW Burrito Inspector

#990
Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

#991
sasquatch95 Well-Known Member

#992
Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

#993
Crom Super-Deluxe Member

#994
sasquatch95 Well-Known Member

#995
Crom Super-Deluxe Member

#996
sasquatch95 Well-Known Member

#997
Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

#998
Crom Super-Deluxe Member

#999
G.T. Official TW Burrito Inspector

#1000
sasquatch95 Well-Known Member

Products Discussed in