What floor jack, stand, & creeper are you all using?

I have been using that harbor freight one for over a year now and works perfectly fine. I liked the low profile for my previous mustang but now on the truck I can slide around under it without even having to jack it up any.

 

1) Harbor Freight 3 Ton Floor Jack
2) Craftsmen Professional 4 Ton Jack Stands
3) Cardboard
4) None
5) Two large bricks

 

I took a length of presure treated 6x6 cut into 11" length x4 and and 8x8 cut into 15" length x4 for cribbage and what ever I may need it for with the truck. And just leave 2 of each of them in the bed.

 

Just got my '17 DCSB, but I plan on using this:

 

Manual should have all that info. I'd personally check there.

 

I have a Craftsman creeper that I don't mind but don't love. In hindsight the HF molded creeper is more comfortable, rolls a lot better and has tool storage built in.

All for half the price of what I paid. Will not be buying another creeper that isn't HF unless for some reason I want an adjustable headrest, which is unlikely.

 

I picked up one of those Snap On look alike yellow Daytona jacks from harbor freight since it is one of the lowest settled, and highest at full lift jacks available.

Haven't even taken it out of the box yet. Previously used a 2 ton jack that was handed down to me from my dad. Lots of years and service from that one, but i can tell it was struggling with the taco.

Biggest issue was the height and having to add blocks and spacers to get the truck high enough. Very dangerous and scary, but was able to do a few things on the truck with it so far, including lift and AAL install.

 

1) Atlas 8000lbs extra height lift
2) Atlas 8000lbs extra height lift with hydraulic scissor jack if necessary
3) Whatever garage shoes I have on that day, I don't like having to lay on the floor
4) The ones that came with the lift to get on it
5) The ones that came with the lift to hold vehicle in place





I do occasionally have to work from the floor with a jack though, in all seriousness.

1) Sunex 6602LP Lowrider Service Jack (I have three floor jacks but this is the best and only one to fit under my car when on the ground)
2) Esco 3 Ton Performance Jack Shorty (mainly used on my car)
3) Pro-Lift C-2800 Creeper Seat and Stool Combo
4) I don't use ramps except for getting on and off the lift
5) I just have the set that came with the lift

 

https://www.tacomaworld.com/threads/front-jack-point-with-oem-skids.417923/#post-11907900

 

Not necessarily what I recommend but what I have

1) Floor jack - Mac Tools 3T Aluminium ***Highly Recommended***
2) Jack stands - 6T HF / 3T Craftsman
3) Creeper - IDK Plastic and was a gift but is low and works well
4) Ramps - IDK Old steel ones
5) Wheel chocks - HF solid rubber/HF plastic (for my camper)

 

Wow, nice set up!

 

Whatever you do, don't get a husky jack. Mine broke and started leaking fluid everywhere. Thank god I was using jack stands and it broke on the downstroke so the bar didn't knock my teeth out.