What Have You Done To Your 2nd Gen Tacoma Today?

http://www.ebay.com/itm/282225914533

They only make Tundra, but you can take the "TUNDRA" replaced w the TACOMA. $30 for the LED and stainless sheet metal ain't bad.

Buy some alphabet stickers, apply to the back of a clear sheet of plastic (like a document protector) spray some silver paint over, peel off the letters. BOOM

 

Lol, very nice. I went for the opposite hybrid look. ('13 headlights, grille, and hood on an 08)

 

Got truck lifted finally

 

Picked this up from the dealership today. The Pro insert goes in it tomorrow when I put it on the truck. Good bye chrome.

 

I wheeled it.

 

vey nice!

 

Takes a bit of work but it's possible. You'll need to cut off the bumper top that flares up and you'll also need to replace the aluminum reinforcement bumper that bolts to the frame. Here's how it looked after I cut the top and put filler pieces using clear lexan.

 

This, heated turn signal puddle light mirrors. It was a B%$# getting the wires into the doors. Used aftermarket mirrors and was able to adapt them to the arms ok. Changed out the puddle lights to LEDs to match the interior LEDs and for more light. The mirror optics aren't as good as OEM, but for $108 I can't complain. They are steady at road speed with no vibration.

 

Yeah I bought this model for the car play.

 

18x9 +0 Bronze RR2 Mounted

 

I really dig this A LOT. Fits really well.

 

Before . . . .
After

 

I did the "have the dealer replace the canister assembly so my freakin' CEL quits coming on" mod today. $600 later I should be good to go.

 

What did you use for this? Anything for the local Home Depot?

 

Got my 40w pods in tonight

 

Bed mat security bolt. More or less just used to keep the mat from moving around. M12 rivnut, button cap bolt, neoprene washer, and stainless fender washer. I wanted it so I could easily take the mat out to clean it and the bed. I hated the idea of using a nut/bolt and crawling underneath the bed to undo it. The truck always has either a tonneau cover or Supertop on it all the time so Im not worried about someone undoing the bolt stealing the mat.

 

Any chance of a post mod write up? I'll be doing this soon.

 

Did a reverse light mod. Flush mount 18w pods in the bumper. PITA to get them even on the first cut.

 

I was going to use some 1/8 thick, by the foot , rubber mat from princess auto. Ended up finding a 15"x80" roll of tool box liner. It's about 3/32 thick. Going to see how it holds up to fucked up weather and cold this winter. Worst case; I have the pattern to cut out of better material in the future.

 

I also am looking for advice on the rear camera, they have them hella cheap on Amazon, like 15$ with good reviews from hundreds of users...worth a damn?

Nice! Going to mount that beast? Where you at? We are just now getting a cold break in time for Thanksgiving hunting

Pretty dope idea, reminds me of my boy's FJ with the LED in the mirror, yours is a little brighter and aimed better though haha