LED signal lights

I just purchased a '14 Tacoma & desire to install LED signal lights. Rather than installing resistors into each light harness, I've heard that there are special signal flashers for the vehicle that do the resisting within themselves to stop the quick signal flashing when using LED bulbs. Does anyone know where these can be obtained & also, is the signal flasher located in the fuse box?

 

Replace the stock flasher relay under the dash with this one, very easy and quick fix. There are cheaper relays on eBay if you want to wait for it coming from China.

http://www.ebay.com/itm/Toyota-Lexu...ash=item2a54a5d63c:g:fn0AAOSwnNBXUIz7&vxp=mtr

First pic shows location of relay.

https://www.tacomaworld.com/threads/want-to-change-to-leds-and-dont-want-to-add-resistors.372625/

 

There should be a write up on how to remove the lower dash panel but basically

Pull up carefully on the door sill/scuff plate

Remove the dead pedal

Remove the kick panel and this will give you access to the lower dash

Unbolt the fuse block and relay is on the back

 

^^^^ what he said

 

I dont believe they make an LED flasher that works on the 2012 plus but if there is one please let me know.

 

I've read that too.

 

Will this work with switchback DRL/signal LED's as well?