New 14 Bolt Brake Kit from RUFFSTUFF!! A new Price too....

I know, how can you improve something so simple? I think we found a couple of ways

We have grown a tremendous amount in the last 10 years and that growth means we can do some things we couldn't when we were smaller. One of thing is that we can go directly to the manufacturers and buy in quantity. That being said we can have them make the items as we want them!



You don't have to look too closely to see our change. The caliper no longer has a Left or Right side, they have 2 bleeders so it no longer matters.



The second thing buying in quantity brings to the table a lower price. We have lowered the cost enough to make the complete kit price $25 less for all of our Disc Brake Conversions are now only $303 and have the dual bleeder Caliper!

These are all your standard 3/4 Ton GM calipers so they work everywhere and we sell them individually without a core charge too!

14 Bolt Disc Brake Conversion Kit (SRW) - RuffStuff Specialties​

 

Will this work for the 3rd Gen Tacoma?

 

If you have swapped a 14 bolt rear axle into your 3rd gen...then yes, it should work.

 

Slolane is correct. This kit is for those who have converted the rear axle to a 14 bolt Chevy axle out of 3/4 and 1 ton trucks from up to 1987.

We do have some weld-on disc brake adapter plates that could be welded to the tacoma housing, and support the GM 3/4 Ton calipers, But at this time I don't have a complete brake kit with a 6 lug option.