Wheel help

Okay guys, lift will be going in this week, ordering wheels and picking up tires at the end of the week. My question is will these wheels work with out needing a spacer, the backspacing is 3.75 inches. I very very very much do not wany a spacer but I do like the wheels so? Yes or no?

 

Hey man. No they will not fit on the front wheels. They rub the caliper slightly. I mistakenly bought these and they didn't fit.

 

You HAVE to use 1/4 inch spacers or grind the caliper down 1/8th of an inch in the front. Toyota makes it so you can't use steel wheels without spacers. I have Cragar 15" x8 soft 8 steelies (pretty much the same as those procomps)with -14mm off set and 4 inch back spacing. Using 1/4 inch hudcentric spacers and extended wheel studs.

 

Sweet rig bro

 

thanks, good to finally get some complements after dumping whole paychecks on her lol

 

I have 17x9 with 18mm offset on 235/65r17 and they fit with no problems.. no rubbing at all. factory suspension

 

Urban offroader, there is no curb to tall for me to rock crawl over. lol.. crossing medians every chance i get with these bad boys. cuttin corners just to go off road (on the grass) in walmart parking lots.

 

Which spacers are you running?

 

I'm in the same exact boat with the same exact wheels and lift...installed the lift and mounted the tires on the new wheels only to find out that the rims didn't fit because of the caliper so now my truck sits up higher with stock wheels and I'm trying to find out what spacers I need

 

I ordered these. for the front only... work well until i can find another solution to the caliper problem http://www.ebay.com/itm/191585490503?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

 

I have 17x9 with an 18mm offset and i am putting a 1.5in spacer on them mostly for looks but also for clearance. I will post pics maybe tomorrow.. i have no lift and black box intact.