What Have You Done To Your 3rd Gen Today?

Great tip....thanks!

 

Price is something I'm not really at liberty to discuss as I'm not sure he wants me advertising that. Best to discuss that with him personally. He does these on a core swap basis. To start he purchased a set brand new, sold them and that person, as part of payment had to hand over his stock ones, and on down the line it goes. So after the install, he took my original factory lights. Modding the lights isn't something that should be done in a day. it takes time for the paint to properly cure, so if you rush the job and re assemble the lights too soon, you're likely to get some off gassing as the paint cures which will make the inside of the lens appear to be foggy. So, Jason tales about 3 weeks to build these to give the paint plenty of time to cure and the housings themselves plenty of time to seal... Core swapping like he's doing is the best way to go.

 

Busy day.

 

how much rubbing / cutting did you guys have to do with the 295s? I am thinking I want to go w/ 295s with my 3" lift...

did you guys have to do the Cab Mount Chop?

I dont mind trimming the fender liner, but I just dont want to cut 90% of it out.....

Thanks in advance

 

One snowboard trip,600 miles the rest to and from work. sucks but than again,it's nice having the reliable truck

 

Not what I did but someone did to my tacoma today... fuck my life

 

Added some extra horsepower to the tailgate and glovebox

 

Lifted. Installed the 3rd gen 5100 with 887 coils. Gained 2"

 

Love to see how it turned out .

 

I think it is called a rugged ridge II. I had it put on by the dealer. So far it has kept things dry, but like anything if it rains hard enough a little will get in.

 

Cigarette burns?

 

Yeah..no longer allowed in the truck . I will occasionally . but as for anyone else. not happening . was the one day I had the covers off to

 

Purchased July 31, 2016. As of December 5, 2016 (4 months and 5 days) I'm at 18,8XX.

 

Lame

 

Uh, I'm not sure you know how to read a tape measure. 32 1/8 is half way down the lug in that picture.

 

Time for some clazzio's

 

Those sure do look good. Is that a cover on the arm rest as well??

 

I was careful doing my fender liner trim most of it is still in tact but I do have to cut a touch more. During compression while turning I have a slight rub on the liner. These two pics should show where I trimmed. Cab mount chop will be needed unless you're doing a big lift. I'm only running ome 885 coils