JBL Premium Entune

Can this HU be used in a non-JBL 2016? Long story short, found one on eBay to replace the non-jbl premium I have...screen is damaged. If so, does it have a separate line out for the sub?

I have upgraded speakers, amp, Lc6i, and powered sub installed in truck. I failed to find the answer through the search function. I know, I should just replace with aftermarket, but want to keep the system stealth looking.

Thanks for any information.

 

Here are pics of the outputs. It looks like the jbl has the amp attached to the hu and you should be able to by-pass.

 

That's not the amp under. That would be the XM module.
There's a couple of threads here where a JBL unit was installed but you will need the AMP (behind the back passenger seat) and wiring too.
Sometime's the amp, enclosure and woofer have been sold here but you would still need the harness.
The write ups would be for the earlier 2nd gens.

 

Thanks. I have a kicker amp and kicker powered sub, along with an LC6i. Seems I'd just need to check the non-jbl 12 pin for the sub out lines.