Question about installing rigid fog light kit 46567

Hey guys. I have searched and haven't found much. I got a good deal on a rigid led fog light kit. For those who have installed it, did you have to remove the fender liners or could you just remove the grill and install from the top. Hoping to not have to remove the fender liners as that seems like a real pain. Any info/advice would be greatly appreciated. Thanks.

 

Been looking at the same thing. Should be able to remove the old ones and install new from the bottom without any issues. Having a hard time finding the TRD Pro mounting brackets though.

 

Not that I could see. The only access i could figure was by removing the fender liners

 

Page 493 of the owner's manual for changing the bulbs talks about going through the fender well liners. I've read somewhere on here just today that removing the grill and getting at them from the top is easy too. That's what I plan to do when mine come in.

 

You don't even have to remove the grill. just stick your arm through the gaps and you can get to the back of the fog lights no problem. at least to change a bulb...

 

remove the grill. pretty easy install. I bought adapters so I didn't have to splice anything. honestly, for the money I'm unimpressed. Don't get me wrong they look good and throw some light, but its all forward. nothing on the side. tomorrow night I'm going to put the oems in and compare. might just take a hit and use these as ditch lights